Switch User Manual

IP routing conﬁguration using the CLI 81

default ip rip poison enable

The default ip rip poison command is executed in the Interface

Conﬁguration mode.

default ip rip proxy-announce command

The default ip rip proxy-announce command is used to disable

proxy announcement on the interface.

The syntax of the default ip rip proxy-announce command is:

default ip rip proxy-announce enable

The default ip rip proxy-announce command is executed in the

Interface Conﬁguration mode.

default ip rip receive command

The default ip rip receive command is used to set the default RIP

version to listen to on this interface.

The syntax of the default ip rip receive command is:

default ip rip receive <rip_version>

The default ip rip receive command is executed in the Interface

Conﬁguration mode.

default ip rip send command

The default ip rip send command is used to set the default RIP

version to send on this interface.

The syntax of the default ip rip send command is:

default ip rip send <rip_version>

The default ip rip send command is executed in the Interface

Conﬁguration mode.

default ip rip supply command

The default ip rip supply command is used to set ip rip supply to

the default value which is enabled.

The syntax of the default ip rip supply command is:

default ip rip supply enable

The default ip rip supply command is executed in the Interface

Conﬁguration mode.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007