Switch User Manual

IP routing configuration using the CLI 83
The ip ospf apply accept command is executed in the Global
Configuration mode.
ip ospf apply redistribute direct command
The ip ospf apply redistribute direct command is used to
apply only direct OSPF redistribution configuration to the switch.
The syntax of the ip ospf apply redistribute direct command is:
ip ospf apply redistribute direct
The ip ospf apply redistribute direct command is executed
in the Global Configuration mode.
ip ospf apply redistribute rip command
The ip ospf apply redistribute rip command is used to apply
only RIP OSPF redistribution configuration on the switch.
The syntax of the ip ospf apply redistribute rip command is:
ip ospf apply redistribute rip
The ip ospf apply redistribute rip command is executed in the
Global Configuration mode.
ip ospf apply redistribute static command
The ip ospf apply redistribute static command is used to
apply only static OSPF redistribution configuration on the switch.
The syntax of the ip ospf apply redistribute static command is:
ip ospf apply redistribute static
The ip ospf apply redistribute static command is executed
in the Global Configuration mode.
ip ospf spf-run command
The ip ospf spf-run command is used to immediately initiate an SPF
run upon holddown timer expiration to update the link state database.
The syntax of the ip ospf spf-run command is:
ip ospf spf-run
The ip ospf spf-run command is executed in the Global Configuration
mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.