Manualshelf

Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503
81828384858687888990
84 IP Routing Configuration and Management
router ospf enable command
The router ospf enable command is used to enable OSPF globally
on the switch.
The syntax of the router ospf enable command is:
router ospf enable
The router ospf enable command is executed in the Global
Configuration mode.
no router ospf enable command
The no router ospf enable command is used to disable OSPF
globally on the switch.
The syntax of the no router ospf enable command is:
no router ospf enable
The no router ospf enable command is executed in the Global
Configuration mode.
router ospf command
The router ospf command is used to place the switch into Router
Configuration mode for the purposes of OSPF configuration.
The syntax of the router ospf command is:
router ospf
The router ospf command is executed in the Global Configuration mode.
default router ospf command
The default router ospf command is used to return the switch to the
default OSPF setting; which is disabled.
The syntax of the default router ospf command is:
default router ospf enable
The default router ospf command is executed in the Global
Configuration mode.
accept adv-rtr command
The accept adv-rtr command is used to configure the router to accept
advertisements from another router in the system.
The syntax of the accept adv-rtr command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.