Manualshelf

Switch User Manual

ManualsBrandsNortel Networks ManualsSwitchNN47200-503
81828384858687888990
88 IP Routing Configuration and Management
The <metric_value> parameter represents the cost value to assign to
the port. This value is an integer between 1 and 65535.
The default-cost ethernet command is executed in the Router
Configuration mode.
default-cost fast-ethernet command
The default-cost fast-ethernet command is used to define the
default cost metric of a fast ethernet (100 Mbps) port.
The syntax of the default-cost fast-ethernet command is:
default-cost fast-ethernet <metric_value>
The <metric_value> parameter represents the cost value to assign to
the port. This value is an integer between 1 and 65535.
The default-cost fast-ethernet command is executed in the Router
Configuration mode.
default-cost gig-ethernet command
The default-cost gig-ethernet command is used to define the
default cost metric of a gig ethernet (1000 Mbps) port.
The syntax of the default-cost gig-ethernet command is:
default-cost gig-ethernet <metric_value>
The <metric_value> parameter represents the cost value to assign to
the port. This value is an integer between 1 and 65535.
The default-cost gig-ethernet command is executed in the Router
Configuration mode.
default-cost ten-gig-ethernet command
The default-cost ten-gig-ethernet command is used to define the
default cost metric of a ten gig ethernet (10000 Mbps) port.
The syntax of the default-cost ten-gig-ethernet command is:
default-cost ten-gig-ethernet <metric_value>
The <metric_value> parameter represents the cost value to assign to
the port. This value is an integer between 1 and 65535.
The default-cost ten-gig-ethernet command is executed in the
Router Configuration mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.