Switch User Manual

90 IP Routing Conﬁguration and Management

no network <ip_address>

The <ip_address> parameter represents the IP address of the interface to

be disabled.

The no network command is executed in the Router Conﬁguration mode.

redistribute command

The redistribute command is used to conﬁgure OSPF route

redistribution. Direct, RIP, and static route redistribution is currently

supported.

The syntax of the redistribute command is:

redistribute <route_type> [enable] [metric <metric_value>]

[metric-type <metric_type>] [route-policy <policy_name>]

[subnets <subnet_setting>]

The parameters for this command are listed below.

redistribute parameters

Parameters Description

<route_type>

The type of route to be conﬁgured. Valid options are

direct, rip, and static.

<metric_value> The metric value to associate with the route redistribution.

This is an integer value between 0 and 65535.

<metric_type> The metric type to associate with the route redistribution.

Valid options are type1 and type2.

<policy_name> The route policy to associate with route redistribution.

This is the name of an existing route policy.

<subnet_setting> The subnet advertisement setting of this route

redistribution. This determines whether individual subnets

are advertised. Valid options are allow and suppress.

The redistribute command is executed in the Router Conﬁguration

mode.

no redistribute command

The no redistribute command is used to disable an OSPF route policy

or OSPF route redistribution completely.

The syntax of the no redistribute command is:

redistribute <route_type> [enable] [route-policy

<policy_name>]

The parameters for this command are listed below.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007