Switch User Manual

92 IP Routing Conﬁguration and Management

The syntax of the no router-id command is:

no router-id

The no router-id command is executed in the Router Conﬁguration

mode.

timers basic holddown command

The timers basic holddown command is used to conﬁgure the OSPF

holddown timer.

The syntax of the timers basic holddown command is:

timers basic holddown <timer_value>

The <timer_value> parameter represents a second value between 3

and 60 seconds.

The command is executed in the Router Conﬁguration mode.

trap command

The trap command is used to enable OSPF system traps.

The syntax of the trap command is:

trap enable

The trap command is executed in the Router Conﬁguration mode.

no trap command

The no trap command is used to disable OSPF system traps.

The syntax of the no trap command is:

no trap enable

The no trap command is executed in the Router Conﬁguration mode.

area virtual-link command

Use the area virtual-link command to create a virtual interface.

The syntax for the area virtual-link command is:

area virtual-link <A.B.C.D.> <W.X.Y.Z> {[authentication-key

<WORD>] [authentication-type {none|simple|message-digest}]

[primary-md5-key <1-255>] [dead-interval <0-2147483647>]

[hello-interval <1-65535>] [retransmit-interval <0-3600>]

[transit-delay <0-3600>]

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007