Switch User Manual

94 IP Routing Configuration and Management
no area virtual-link <A.B.C.D.> <W.X.Y.Z> [authentication-
key]
no area virtual-link command parameters
Parameter Description
<A.B.C.D.> Specifies the transit area Id expressed as an IP address.
<W.X.Y.Z> Specifies the neighbor router ID expressed as an IP
address.
authentication-key Specifies the unique identifier assigned to the
authentication key
The no area virtual-link command is executed in the Router
Configuration mode.
area virtual-link message-digest-key command
Use the area virtual-link message-digest-key command to
create a virtual interface message digest key.
The syntax for the area virtual-link message-digest-key
command is:
area virtual-link message-digest-key <A.B.C.D.> <A.B.C.D./0-
32> <1-255> md5-key <WORD>
area virtual-link message-digest key command parameters
Parameter Description
<A.B.C.D.> Specifies the transit area Id expressed as an IP address.
<W.X.Y.Z> Specifies the neighbor router ID expressed as an IP
address.
<1-255>
Specifies the primary MD5 key value, expressed as an
integer from 1-255.
md5-key <WORD> Specifies the user-selected key used to encrypt OSPF
protocol packets for transmission.
The area virtual-link message-digest-key command is executed
in the Router Configuration mode.
no area virtual-link message-digest-key command
Use the no area virtual-link message-digest-key command to
delete a virtual interface message digest key.
The syntax for the no area virtual-link message-digest-key
command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.