Switch User Manual

IP routing conﬁguration using the CLI 99

ip ospf transmit-delay command

The ip ospf transmit-delay command is used to deﬁne the transmit

delay for this OSPF interface.

The syntax of the ip ospf transmit-delay command is:

ip ospf transmit-delay <interval>

The <interval> parameter is the transmit delay in seconds. This is an

integer value between 0 and 3600.

The ip ospf transmit-delay command is executed in the Interface

Conﬁguration mode.

ip ospf message-digest-key command

The ip ospf message-digest-key command is used to deﬁne the

MD5 keys referenced in the ip ospf primary-md5-key command.

The syntax of the ip ospf message-digest-key command is:

ip ospf message-digest-key <key_number> md5 <key_value>

The <key_number> parameter represents the MD5 key to be conﬁgured.

This is an integer value between 1 and 255. The <key_value> parameter

represents the value of the key being conﬁgured. This is a string value of up

to 16 characters in length.

The ip ospf message-digest-key command is executed in the

Interface Conﬁguration mode.

OSPF show commands

OSPF functionality provides a wide range of commands used to display

statistics and conﬁgured parameters for the router. These commands are

available for use in any command mode. OSPF Show commands are

outlined in the table below.

OSPF show commands

Command

Description

show ip ospf Displays general information on OSPF

conﬁguration.

show ip ospf accept Displays information on OSPF advertising

routers.

show ip ospf area

<ip_address>

Displays conﬁguration information about the

OSPF area speciﬁed in the <ip_address>

parameter. Omitting this parameter displays

information for all OSPF areas.

Nortel Ethernet Routing Switch 5500 Series

Conﬁguration-IP Routing Protocols

NN47200-503 03.01 Standard

5.1 27 August 2007