Switch User Manual

Configuring Auto-RF 397
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Changing the channel holddown interval
The default channel holddown interval is 900 seconds. You can change the interval to a value from 0 to 65535 seconds.
To change the channel holddown interval, use the following command:
set radio-profile name auto-tune channel-holddown holddown
To change the channel holddown for radios in radio profile rp2 to 600 seconds, type the following command:
WSS# set radio-profile rp2 auto-tune channel-holddown 600
success: change accepted.