- Nortel Network Multiservice Platform User's Guide

Operation, administration, and maintenance (OAM) features 2-53

Planning and Ordering Guide—Part 1 of 2 NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004

Linear point-to-point

A point-to-point configuration transports traffic between two sites on a

protected OMX DWDM system. Two fiber spans between the sites in a

DWDM point-to-point configuration have the same functionality as up to 32

fiber spans in a non-DWDM point-to-point configuration. An OMX shelf is

required at both sites. The fiber connects to the OTS OUT on the OMX module

at one site, and the OTS IN on the OMX module at the other site. See Figure

2-28 for an example of a point-to-point configuration for four channels.

Figure 2-28

DWDM point-to-point configuration

EX0811a

Physical Connections Logical Connections

3500

OMX