User's Manual
Table Of Contents
- Contents
- Preface
- The Command Line Interface
- First-Time Configuration
- Using the Setup Utility
- Setting Passwords
- Menu Basics
- The Information Menu
- Information Menu
- System Information
- Layer 2 Information
- Layer 3 Information
- IP Routing Information
- ARP Information
- BGP Information
- BGP Peer information
- BGP Summary information
- OSPF Information
- Routing Information Protocol Information
- IP Information
- IGMP Multicast Group Information
- IGMP Group Information
- IGMP Multicast Router Port Information
- IGMP Mrouter Information
- VRRP Information
- Quality of Service Information
- 802.1p Information
- Access Control List Information
- Link Status Information
- Port Information
- Logical Port to GEA Port Mapping
- Fiber Port SFP Status
- Information Dump
- The Statistics Menu
- The Configuration Menu
- Configuration Menu
- Viewing, Applying, and Saving Changes
- System Configuration
- Port Configuration
- Layer 2 Configuration
- 802.1x Configuration
- Rapid Spanning Tree Protocol/ Multiple Spanning Tree Protocol Configuration
- Common Internal Spanning Tree Configuration
- Spanning Tree Configuration
- GVRP Configuration
- GVRP Port Configuration
- Trunk Configuration
- IP Trunk Hash Configuration
- LACP Configuration
- Layer 2 Failover Configuration
- VLAN Configuration
- Protocol-based VLAN Configuration
- Private VLAN Configuration
- Layer 3 Configuration
- IP Interface Configuration
- Default Gateway Configuration
- IP Static Route Configuration
- IP Multicast Route Configuration
- ARP Configuration
- IP Forwarding Configuration
- Network Filter Configuration
- Routing Map Configuration
- Routing Information Protocol Configuration
- Open Shortest Path First Configuration
- Border Gateway Protocol Configuration
- IGMP Configuration
- Domain Name System Configuration
- Bootstrap Protocol Relay Configuration
- VRRP Configuration
- Quality of Service Configuration
- Access Control List Configuration
- Port Mirroring Configuration
- Setup
- Dump
- Saving the Active Switch Configuration
- Restoring the Active Switch Configuration
- The Operations Menu
- The Boot Options Menu
- The Maintenance Menu
- Alteon OS Syslog Messages
- Alteon OS SNMP Agent
- Glossary
- Index
Alteon OS Command Reference
178
The Configuration Menu 43W7774, May 2007
/cfg/sys/sshd
SSH Server Configuration
For the GbE Switch Module, this menu enables Secure Shell access from any SSH client. SSH
scripts can be viewed by using the /cfg/dump command (see page 321).
NOTE – Except for cur, the commands of this menu are only accessible through a serial con-
nection.
[SSHD Menu]
intrval - Set Interval for generating the RSA server key
scpadm - Set SCP-only admin password
hkeygen - Generate the RSA host key
skeygen - Generate the RSA server key
sshport - Set SSH server port number
ena - Enable the SCP apply and save
dis - Disable the SCP apply and save
on - Turn SSH server ON
off - Turn SSH server OFF
cur - Display current SSH server configuration
Table 6-4 System Configuration Menu Options (/cfg/sys/sshd)
Command Syntax and Usage
intrval <0 - 24>
Set the interval for auto-generation of the RSA server key.
scpadm
Set the administration password for SCP access.
hkeygen
Generate the RSA host key.
skeygen
Generate the RSA server key.
sshport <TCP port number>
Sets the SSH server port number.
ena
Enables the SCP apply and save.
dis
Disables the SCP apply and save.
on
Enables the SSH server.