User's Manual

24 Appendix A Getting started
N0060603N0060603
These conventions and symbols are used to represent the Business Series Terminal display and
dialpad.
These text conventions are used in this guide to indicate the information described:
Tip: Alerts you to additional information that can help you perform a task.
!
Security Note: Indicates a point of system security where a default should be
changed, or where the administrator needs to make a decision about the level of
security required for the system.
Warning: Alerts you to ground yourself with an antistatic grounding strap
before performing the maintenance procedure.
Warning: Alerts you to remove the BCM main unit and expansion unit power
cords from the AC outlet before performing any maintenance procedure.
Convention Example Used for
Word in a special font (shown in
the top line of the display)
Pswd:
Command line prompts on display telephones.
Underlined word in capital letters
(shown in the bottom line of a
two-line display telephone)
PLAY
Display option. Available on two-line display
telephones
. Press the button directly below the
option on the display to proceed.
Dialpad buttons
£
Buttons you press on the dialpad to select a
particular option.
Convention Description
bold Courier
text
Indicates command names and options and text that you must enter.
Example: Use the
info command.
Example: Enter
show ip {alerts|routes}.
italic text Indicates book titles.
plain Courier
text
Indicates command syntax and system output (for example, prompts
and system messages).
Example:
Set Trap Monitor Filters