User's Manual

Appendix C Configuring the BCM system 37
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
Startup parameters overview
The startup parameters are the remaining required parameters that cannot be configured using
Telset Administration. These parameters must be configured using Element Manager. See Table 5
for a list of the startup parameters.
Table 5 Startup parameters
Parameters Telset Administration Element Manager
System:
• System name
N/A Configuration > System >
Identification
(ID set automatically)
System:
• System ID
N/A Configuration > System >
Keycodes
(View ID - it is set automatically
and cannot be changed)
Time:
• Date and Time source
• NTP server address
• Date and time
• Time zone
N/A Configuration > System > Date
and Time
DHCP server:
• Enable/disable server
• IP domain name
• Primary DNS
• Secondary DNS
• Default gateway
N/A Configuration > Data Services >
DHCP Server > Subnets tab
IP Phones:
• Enable registration
• Enable global pwd
• Global pwd
• Auto-assign DNs
• Advertisement logo
N/A Configuration > Resources >
Telephony Resources
SNMP Agent:
• Enable/disable SNMP agent
• Minimum security
• SNMP version support
N/A Configuration > Administrator
Access > SNMP > General tab
SNMP community:
• Community string
• Type of access
N/A Configuration > Administrator
Access > SNMP > Community
strings tab
SNMP manager:
• Manager IP address
N/A Configuration > Administrator
Access > SNMP > General tab
User account:
•User ID
•Group
• Description
• Callback number
N/A Configuration > Administrator
Access > View by Accounts tab