User's Manual

Appendix D Using Telset Administration to set the basic parameters 39
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
Appendix D
Using Telset Administration to set the basic
parameters
Telset Administration allows you to use a digital telephone with a two-line display to set the BCM
configuration parameters. You cannot set all the basic parameters using Telset Administration.
Therefore, after configuring the initial parameters, you must use Element Manager to set the
startup parameters. Refer to “Configuring the startup parameters” on page 50.
Refer to the BCM 4.0 Telset Administration Guide for more information on Telset Administration.
Figure 5 shows an overview of using Telset Administration to set the basic parameters.
Figure 5 Overview of using Telset Administration