User's Manual

Appendix E Using Element Manager to set the basic parameters 45
BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum
Appendix E
Using Element Manager to set the basic parameters
The Element Manager application provides a computer-based client interface that can connect to
devices over an IP network and display the programming interface for that device.
Through Element Manager, you can configure all of the basic parameters, which include:
• “Configuring the initial parameters” on page 47
• “Configuring the startup parameters” on page 50
Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.
Figure 6 shows an overview of using Element Manager to set the basic parameters.
Figure 6 Overview of using Element Manager