User's Manual

52 Appendix E Using Element Manager to set the basic parameters
N0060603N0060603
8 Click the IP Terminal DHCP Options tab.
9 Configure the DHCP server attributes (see Table 11).
To configure IP Phones
1 From the Configuration tab, click the Resources folder to expand it.
2 Select Telephony Resources.
3 From the Actual type column, select IP & App Sets.
The Details for Module area displays in the lower pane with the IP Terminal Global Settings
tab as the default.
WINS node type Allows you to specify a client’s WINS node type.
The BCM system automatically sets this value to H-node on all DHCP clients.
This setting configures the DHCP client PCs to use P-node name resolution
before resorting to B-node name resolution. This is efficient when a WINS
server is configured for the network. The BCM system also includes a WINS
server.
Note: Use caution if you change this attribute.
Default gateway Allows you to specify the IP address of the default next-hop router.
BCM automatically assigns the value for this parameter. If the IP address or
subnet mask for the corresponding LAN interface changes, this value is
overwritten. Use caution when changing this value.
Lease time Allows you to specify the time, in seconds, for an address assignment until the
client’s lease expires.
The default is 259200 seconds (72 hours).
Table 11 DHCP server: IP Terminal DHCP Options attributes
Attribute Description
VLAN identifiers
(comma-delimited)
Allows you to specify the Virtual LAN (VLAN) ID numbers that are given to the
IP telephones.
TFTP Server Allows you to specify the IP address of the TFTP server that is used by WLAN
IP telephones. If your system does not have WLAN IP telephones, leave this
box empty.
Enter the IP address in a valid dot format.
WLAN IP Telephony
Manager 2245
Allows you to specify the IP address of the SVP server that is used by WLAN
IP telephones. If your system does not have WLAN IP telephones, leave this
box empty.
Enter the IP address in a valid dot format.
Table 10 Subnets: General Settings attributes (Sheet 2 of 2)
Attribute Description