User's Manual
58 Appendix F Completing the initial installation (optional)
N0060603N0060603
After the basic configuration is completed, you can further customize your system by using the
following configuration options:
• “Configuring the media bay module”
• “Configuring modem settings” on page 59
• “Checking for software updates” on page 59
• “Configuring voice mail” on page 59
• “Customizing security policies” on page 59
• “Performing a backup” on page 59
Configuring the media bay module
For information on installing a media bay module (MBM) and setting the dip switches, refer to
BCM 3.7 for BCM1000 Installation and Maintenance Guide.
To configure the MBM
1 Open BCM Element Manager and connect to your BCM system.
2 From the Configuration tab, click the Resources folder to expand it.
3 From the Resources folder, select Telephony Resources (see Figure 8).
Figure 8 Telephony Resources page
4 In the Modules section, select the row of the MBM that you want to configure.
5 Double-click the Prog Type field to display the drop-down list.
6 Select the type of MBM that you installed in that location.
7 Click Enable.
8 Repeat steps 4 to 7 to enable each MBM in your system.