User's Manual
Datafilling a Metro Cell Site
6-5
DMS-MTX DualMode Metrocell Cell Site Description
Table VCHINV, CCHINV, LCRINV
The frequency assignment tables should be datafilled so that the TRU
location in the Metro RF Frame with respect to the port card of the ICRM are
correctly identified in the datafill tuple. Each physical location in the Metro
RF Frame corresponds with a port number of the NT8X47BA Port Card of
the ICRM. The datafill of these frequency assignment tables requires that the
P-side card and port number be defined. Each NT8X47BA Port Card of the
ICRM must be cabled to either J205 or J206 of the Metro RF Frame RIP.
Table 6-6 is a matrix of NT8X47BA port connections to the TRU number of
the Metro RF frame for each RIP connector.
Note:
Even though channels can be datafilled on every Port Card and on
almost every Port (Exception: Card 8 Port 14, Card 8 Port 15, Card 9 Port
13, Card 9 Port 14, and Card 9 Port 15), it is recommended that the
Control Channel and its backup (Locate Receiver, Analog or Digital) be
datafilled on separate Port Cards (see Frequency Assignment Example).
Table 6-6
NT8X47BA Port Numbers for Metro TRU locations
RIP Connector J205 Rip Connector J206
METRO
TRU #
NT8X47BA
Port #
METRO
TRU #
NT8X47BA
Port #
10 20
31 41
52 62
73 83
94 104
11 5 12 5
13 6 14 6
15 7 16 7
17 8 18 8
19 9 20 9
21 10 22 10
23 11 24 11
Base
ATC 1
Duplexer
1
RF RIP
ATC 2
ATC 3
RF Frame 1
TRU 1
TRU 2
TRU 3
TRU 4
TRU 5
TRU 6
TRU 7
TRU 8
DPA
1
DPA
2
DPA
3
DPA
4
TRU 9
TRU 10
TRU 11
TRU 12
TRU 13
TRU 14
TRU 15
TRU 16
DPA
5
DPA
6
DPA
7
DPA
8
TRU 17
TRU 18
TRU 19
TRU 20
TRU 21
TRU 22
TRU 23
TRU 24
DPA
9
DPA
10
DPA
11
DPA
12
Location in
Metro Frame