Avaya WLAN 2332 Series Outdoor Solution Guide Avaya WLAN 2300 Document Status: Standard Document Number: NN47250-506 (324883-B Rev 02) Document Version: 02.
© 2010 Avaya Inc. All Rights Reserved. Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing, Avaya assumes no liability for any errors. Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes.
Contents Basics of Avaya WLAN Series 2332 Outdoor Solution..................................7 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 What is the Avaya WLAN Series 2332 Outdoor Solution . . . . . . . . . . . . . . . . . 7 Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents United States and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2.4 GHz Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.0 GHz Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 European Union (EU) and European Fair Trade Association (EFTA) . . . . 18 2.4 GHz Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.
Contents 5 WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 57 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Kit Contents for Series 2332 AP installed outdoors in NEMA Enclosure . . . . 57 Site Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents NN47250-506 (324883-B Rev 02 Version 02.
Basics of Avaya WLAN Series 2332 Outdoor Solution 7 Basics of Avaya WLAN Series 2332 Outdoor Solution Introduction This document provides the basic outdoor hardware installation instructions for your WLAN Series 2332.
Basics of Avaya WLAN Series 2332 Outdoor Solution Customer service Visit the Avaya Web site to access the complete range of services and support that Avaya provides. Go to www.avaya.com or go to one of the pages listed in the following sections.
Basics of Avaya WLAN Series 2332 Outdoor Solution 9 Regulatory compliance statements for WLAN Series 2332 Access Points The WLAN Series 2332 Access Points consist of the following models: 2332-A1, 2332-A2, 2332-A3, 2332-A4, 2332-A5, 2332-A6, 2332-E1, 2332-E2, 2332-E3, 2332-E4, 2332-E5, 2332-E6, 2332-E7, 2332-E8, 2332-E9, 2332-J1.
Basics of Avaya WLAN Series 2332 Outdoor Solution RF radiation exposure and hazard statement To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 20 cm (8 in.) away from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed.
Basics of Avaya WLAN Series 2332 Outdoor Solution 11 European Union and European Free Trade Association (EFTA) regulatory compliance This equipment may be operated in the countries that comprise the member countries of the European Union and the European Free Trade Association.
Basics of Avaya WLAN Series 2332 Outdoor Solution Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques and Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN. Certifications are harmonized to the EN standards covering essential requirements under article 3.2 of the R&TTE Directive.
Basics of Avaya WLAN Series 2332 Outdoor Solution 13 Germany Deutsch Hiermit erklärt Avaya., dass sich das Gerät WLAN Radiomodell 2332, in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Greece ΕΛΛΗΝΙΚΗ ÌÅ ÔÇÍ ÐÁÑÏÕÓÁ Avaya. ÇË.ÍÅÉ ÏÔÉ WLAN ραδιο πρότυπο 2332, ÓÕÌÌÏÑÖ.ÍÅÔÁÉ ÐÑÏÓ ÔÉÓ ÏÕÓÉ..ÅÉÓ ÁÐÁÉÔÇÓÅÉÓ ÊÁÉ ÔÉÓ ËÏÉÐÅÓ Ó×ÅÔÉÊÅÓ .ÉÁÔÁÎÅÉÓ ÔÇÓ Ï.ÇÃÉÁÓ 1999/5/ÅÊ.
Basics of Avaya WLAN Series 2332 Outdoor Solution Romania Român Astfel, Avaya declarã acel acest WLAN Radio Model 2332, este în conformitate cu cerinþele necesare ºi proviziile alte semnificative de Directive 1999 5 EC. Slovakia Slovensky Avayatýmto vyhlasuje, že WLAN Radio Model 2332 spåòa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Basics of Avaya WLAN Series 2332 Outdoor Solution 15 Operation using the 5.15 to 5.25 GHz, 5.25 to 5.35 GHz, and 5.470 to 5.725 GHz channels in the European Community To remain in conformance with European National spectrum usage laws, follow the channel limitations associated with the 5 GHz bands as specified in this document.
Basics of Avaya WLAN Series 2332 Outdoor Solution B. For Home Use (Class B device) This product obtained EMC Registration for home use. It can be used in all areas, including homes. Taiwan Compliance Statement Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency device.
Basics of Avaya WLAN Series 2332 Outdoor Solution 17 4.7.5 Within the 5.25-5.35 GHz band, U-NII devices will be restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. 4.7.6 The operation of the U-NII devices is subject to the conditions that no harmful interference is caused.
Basics of Avaya WLAN Series 2332 Outdoor Solution Outdoor Operating Restrictions United States and Canada 2.4 GHz Band IEEE 802.11b/g operation in the 2.400 to 2.4835 GHz ISM band is governed by FCC Part 15, Subparts B & C in the US and IC RSS-210 in Canada. These rules state that the parameters for both indoor and outdoor operation in this frequency band are identical. 5.0 GHz Bands IEEE 802.
Basics of Avaya WLAN Series 2332 Outdoor Solution 19 Table 2: Excepted member states France: Operation outdoors for IEEE 802.11b/g is limited to 2400 to 2454 MHz, channels 1 through 7, at a maximum EIRP of 100 mW. The 2332-E1 Access Point is disabled from operating on Channels 8 through 13 when either "outdoor" mode or an "outdoor antenna configuration" is selected. Italy: Operation outdoors for IEEE 802.11b/g is prohibited without obtaining a license.
Basics of Avaya WLAN Series 2332 Outdoor Solution Country Specific Outdoor Operation Restrictions The following restrictions of use for outdoor operation apply to the Series 2332 Access Points. These must be followed to meet local regulatory restrictions and ensure that the access points operate in the appropriate modes. Table 5: 2.4 GHz Outdoor Restrictions REGION RESTRICTIONS MIDDLE EAST Egypt Outdoor operation is NOT permitted in the 2.
Basics of Avaya WLAN Series 2332 Outdoor Solution 21 Table 6: 5.0 GHz Outdoor Restrictions REGION RESTRICTIONS Europe New Zealand 5150 to 5250 MHz and 5250 to 5350 MHz operation is restricted to INDOOR use ONLY Philippines 5150 to 5250 MHz operation is restricted to INDOOR use ONLY Taiwan 5250 to 5350 MHz operation is restricted to INDOOR use ONLY Thailand Outdoor operation is NOT permitted in the 5.
Basics of Avaya WLAN Series 2332 Outdoor Solution Costa Rica Outdoor operation is NOT permitted in the 5.
Basics of Avaya WLAN Series 2332 Outdoor Solution 23 Country 2.4 GHz 5.
Basics of Avaya WLAN Series 2332 Outdoor Solution Translated caution statements, warning conventions and warning messages The following caution statement, warning conventions, and warning messages apply to this manual. Caution! The Series 2332 Access Point radios are disabled by default and can be enabled only by a system administrator using the WSS.
Basics of Avaya WLAN Series 2332 Outdoor Solution 25 Caution! Do not install the outdoor antenna or connect it to the surge suppressor/Access Point during a storm. Attention ! N'installez pas l'antenne extérieure ou ne la reliez pas au point de la montée subite suppressor/Access pendant un donner l' assaut à. Achtung! Bringen Sie nicht die im Freienantenne an oder schließen Sie sie an den Schwankung suppressor/Access Punkt während eines Sturms an.
Basics of Avaya WLAN Series 2332 Outdoor Solution Caution! The power source equipment connected to the Access Point, such as the Wireless Security Switch or PoE injector, must be provided with a reliable earth ground to ensure safety of the system. Attention ! La source d'alimentation branchée au point d'accès (commutateur de sécurité sans fil ou alimentation électrique par câble Ethernet) doit être équipé d'une mise à la terre fiable afin de garantir la sécurité du système.
Basics of Avaya WLAN Series 2332 Outdoor Solution 27 Warning conventions Warning! This situation or condition can cause injury. Avertissement! Cette situation ou cette condition peuvent provoquer des blessures. Warnung! Diese Situation oder dieser Zustand kann zu Verletzungen führen. Advertencia! Esta situação ou condição podem causar dano. Aviso! Esta situación o condición puede causar lesiones. Avviso! Situazione o condizione che può causare ferite. Warning! High voltage.
Basics of Avaya WLAN Series 2332 Outdoor Solution Qualified service personnel warning Warning! Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation. Avertissement! L’installation doit être effectuée uniquement par des techniciens qualifiés. Lisez et suivez toutes les notices d’avertissement et les instructions figurant sur le produit ou comprises dans la documentation.
Basics of Avaya WLAN Series 2332 Outdoor Solution 29 Radio safety warnings Warning! Install this device in such a manner as to maintain a minimum of 20 cm (7.9 inches) separation distance between the radiating element(s) and all persons. This safety warning conforms with FCC radio frequency exposure limits. Avertissement! Installez cet appareil de façon à maintenir une distance d'au moins 20 cm entre les éléments rayonnants et tout individu.
Basics of Avaya WLAN Series 2332 Outdoor Solution Warning! Do not operate access point near unshielded blasting caps or in an otherwise explosive environment unless the device has been modified for such use by qualified personnel. Avertissement! Ne faites pas fonctionner de point d'accès à proximité de détonateurs non blindés ou dans des milieux présentant des risques d'explosion à moins que l'appareil n'ait été modifié pour cet usage par un personnel qualifié.
Basics of Avaya WLAN Series 2332 Outdoor Solution 31 Warning! Do not touch or move the access point when the antennas are transmitting or receiving. Avertissement! Ne touchez pas le point d'accès lors de l'émission ou de la réception des antennes. Warnung! Berühren und bewegen Sie den Zugangspunkt nicht, wenn die Antennen senden oder empfangen. Advertencia! No toque ni mueva el punto de acceso cuando las antenas transmiten o reciben.
Basics of Avaya WLAN Series 2332 Outdoor Solution Warning! Before using a wireless device in a hazardous location, consult the local codes, national codes, and safety directors of the location for usage constraints.
Basics of Avaya WLAN Series 2332 Outdoor Solution 33 Warning! Intentional radiators, such as the Avaya WLAN Series 2332 Access Point are not intended to be operated with any antenna(s) other than those furnished by Avaya. An intentional radiator may only be operated with the antenna(s) with which it is authorized. For a complete listing of the authorized antennas for use with this product, visit http://www.avaya.com/support.
Basics of Avaya WLAN Series 2332 Outdoor Solution Warning! All wiring and cables to the Access Point, the surge suppressor and the outdoor antenna should be routed separately. It is particularly important that AC wiring or other outside cabling does not come in contact with the Access Point, antenna cables or interface wiring. Avertissement! Tous les câblage et câbles au point d'accès, au filtre de montée subite et à l'antenne extérieure devraient être conduits séparément.
Basics of Avaya WLAN Series 2332 Outdoor Solution 35 Earth ground warning Warning! Earth grounding is required for a WSS installed in a rack. If you are relying on the rack to provide ground, the rack itself must be grounded with a ground strap to the earth ground. Metal screws attaching the switch to the rack provide ground attachment to the rack. Avertissement ! La mise à la terre est requise pour l'installation du WSS dans un support.
Basics of Avaya WLAN Series 2332 Outdoor Solution Warning! A properly rated surge suppressor is required for any cable/antenna combination exiting the building. The required components must be rated and approved for use in the intended application. Avertissement! Un filtre de montée subite correctement évalué est exigé pour n'importe quelle combinaison de cable/antenna sortant le bâtiment. Les composants exigés doivent être évalués et approuvés pour l'usage dans l'application prévue.
Basics of Avaya WLAN Series 2332 Outdoor Solution 37 Warning! Avaya requires that the Access Point in the outdoor enclosure be powered with a Power Over Ethernet (POE) that is supplied only from a Avaya WSS 2350 or WSS 2360/2361 wireless security switch. Avertissement! Selon les consignes de Avaya, le point d'accès situé dans le boîtier extérieur doit être alimenté par un module PoE (Power over Ethernet) fourni exclusivement par un commutateur de sécurité sans fil Avaya WSS 2350 ou WSS 2360/2361.
Basics of Avaya WLAN Series 2332 Outdoor Solution NN47250-506 (324883-B Version 02.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 39 WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Introduction This chapter provides the basic outdoor installation instructions for WLAN Series 2332 Outdoor Solution, where the access point is mounted indoors. Kit Contents The WLAN Series 2332 Outdoor Solution with Indoor Mounted AP consists of the following components: An access point, a surge protector and grounding block, and an external antenna. Figure 1 shows a typical installation.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Package contents Table 7. Avaya WLAN Series 2332 Outdoor Solution kits for AP InstalledoIndoors Outdoor Solution Kits for Part Number Kit Components DR4011019E5 Phase I Outdoor starter bundle Surge suppressor Coax-Seal tape 10 ft RoHS Plenum rated coax cable 1- Male RSMA connector 1- Female RSMA connector DR400085E5 Surge suppressor Surge suppressor Coax-Seal tape Documentation DR4018006E5 10 ft.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 41 Basic outdoor installation information Signal path distance In an environment without obstacles in the signal path, the maximum communication distance between antennas depends primarily on the types of antennas, the operating frequency, the data rate and the free space loss between them. Make sure your proposed mounting site provides adequate clearance around the transmitting antenna to enable adequate signal propagation.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Contact information and access permissions Make sure the following general requirements are met before beginning the installation: • Confirm customer-provided information, such as site contact names and telephone numbers. • Examine the building (tenant) lease to verify or establish building roof or tower rights. If available, use layout drawings to evaluate the feasibility of modifications or special permits that might be necessary.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 43 Hardware installation Required components Figure 2.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Outdoor external antenna connection scenarios There are three basic connection scenarios that are supported for implementing the Avaya WLAN Series 2332 Outdoor Solution. These are described in the following table: Table 8.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 45 Table 9. Loss associated with 10-foot plenum rated cable and surge suppressor Loss associated Surge a Connects AP to Surge Suppressor Plenum Rated Cable (RG-58) Component 10 ft Cable Frequency (MHz) Loss (dB) 2400 - 2500 5150 - 5250 Surge Suppressor 10 ft Cable + Surge Suppressor Loss (linear) Loss (dB) Loss (linear) Loss (dB) Loss (linear) -2.89 0.486 -0.13 0.029 -3.02 0.501 -4.96 0.681 -0.40 0.087 -5.36 0.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Table 10. Loss associated with 10-foot and 25-foot outdoor rated extension cables Loss associated with 10- Connects surge suppressor to Antenna Outdoor Cable (LMR-240) Component 10 ft Cable Frequency (MHz) Loss (dB) Loss (linear) Loss (dB) Loss (linear) 2400 - 2500 -1.84 0.345 -3.89 0.591 5150 - 5250 -2.68 0.460 -5.70 0.731 5250 - 5350 -2.79 0.474 -5.81 0.737 5470 - 5725 -2.78 0.473 -5.91 0.743 5725 - 5850 -2.81 0.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 47 Warning! A properly rated surge suppressor is required for any cable/antenna combination exiting the building. The required components must be rated and approved for use in the intended application. Figure 3. Surge suppressor Installation For best results, install the surge suppressor in close proximity to a low-resistance ground at a point where the coaxial cable enters the building.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Figure 4. #8 Ground lead Grounding principles To connect the surge suppressor to ground, use the shortest and most direct run possible with #8 solid copper wire (or equivalent). For exterior installations, weatherproof the coax connectors with a suitable mastic or rubberized tape to prevent water infiltration. (see Figure 4 on page 48).
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 49 Figure 5. Typical installation diagram Figure 6.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Note. A good ground system is essential for proper operation. Warning! A properly rated surge suppressor is required for any cable/antenna combination exiting the building. The required components must be rated and approved for use in the intended application. Outdoor external antennas This section introduces the outdoor external antenna portfolio available for the WLAN Series 2332 Access Points. The portfolio includes 802.11b/g (2.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 51 • has tested and measured each product. The antenna gains expressed in dBi measurements are the tested values and may differ slightly from those published by Cushcraft for similar products. Coax cable seal installation Applying coax seal tape You must weather seal all outside coaxial connections using the coax seal tape provided in the mounting kit.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Figure 8. Coax seal tape after smoothing. 4 Visually inspect the seal to make sure the entire connector area is completely covered. If you find gaps, apply additional Coax-Seal over the existing material and then mold it to shape 5 Repeat these steps for each coaxial connection outside.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 53 Software installation Country of operation Before you can configure APs and radio parameters, you must specify the country in which you plan to operate the radios. Since each country has different regulatory environments, the country code determines the transmit power levels and channels you can configure on the radios. WSS software ensures that the values you can configure are valid for the country you specify.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP To specify the 5.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP 55 Figure 9.
WLAN Series 2332 Outdoor Solution with Indoor Mounted AP Other related documentation references • WLAN—Management System 2300 Series Reference Manual. Instructions for planning, configuring, deploying, and managing the entire WLAN with the WLAN Management System tool suite • WLAN—Security Switch 2300 Series Configuration Guide. Instructions for configuring and managing the system through the WSS software CLI • WLAN—Security Switch 2300 Series Command Line Reference.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 57 WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure Introduction This chapter provides the NEMA Enclosure Installation Instructions for the WLAN Series 2332 Outdoor Solution, where the AP is mounted outdoors. Figure 10.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure Figure 11. Kit Contents of the NEMA Outdoor Solution Site Planning Perform a visual inspection to determine and document the physical characteristics of the site. Ensure that the Site Planning meets the following requirements before you begin the installation: • Identify the roof area, wall, or tower for mounting the Outdoor Solution. • Choose a site with a clear line-of-sight from the transmitting antenna.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 59 • Coverage pattern and available data rates in areas that are not adequately serviced. • Overall system efficiency by effectively directing available energy to where it's needed. • System utility for any installation. The WLAN Series 2332 outdoor external antennas are the only external antennas certified by Avaya for use with WLAN Series 2332 systems.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure • If anything, such as a wire or mast, does come in contact with a powerline, DO NOT TOUCH IT OR ATTEMPT TO MOVE IT. Call the power company. • Do not attempt to errect antennas or towers on windy days. Installation • The horizontal distance from a tower, mast or antenna to the nearest power line should be at least twice the total length of the mast/antenna combination.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 61 Grounding principles To connect the Surge Protector to ground, use the shortest and most direct run possible with #8 solid copper wire (or equivalent). Refer to your local electric code standards for correct installation.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure Figure 13. External Antenna cables in the Enclosure 3 Obtain the AP mounting bracket from the AP kit. 4 Use two 6/32 screws to secure the mounting bracket to the standoffs in the enclosure as shown in Figure 14 Figure 14. Mounting Bracket 5 Unscrew the Ethernet Gland nut on the outside of the enclosure. 6 Remove the split rubber washers from the Ethernet Gland nut. 7 Slide the Ethernet Gland nut onto the Ethernet cable.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 63 Figure 15. 9 Rubber Washers into the Ethernet cable Insert enough of the Ethernet cable into the enclosure so that you can connect it to the AP. 10 Tighten the Gland nut, but not 100%. Tighten it just enough to ensure it stays in place. 11 Loop the Ethernet cable through the mounting bracket as shown in Figure 16 . Figure 16.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure Figure 17. Connecting Ethernet cable to Port 1 13 Connect the external antenna cables to the AP as shown in Figure 18 . 11A Antenna cable connects to top connector. 11BG Antenna cable connects to bottom connector. Figure 18. Connecting external antenna cables to the AP 14 Use a 5/16 wrench to tighten the external antenna connectors to the recommended specifications. NN47250-506 (324883-B Rev 02 Version 02.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 65 Note. Be careful not to over-tighten the coaxial cable connections. Damage to the AP may result if too much torque is applied to the connection. 15 Attach AP to the AP mounting bracket. 16 From AP side opposite of Antenna connections, find location to lock Mounting plate. For more information about Installation of Mounting Plate, refer to the Avaya WLAN Series 2332 Access Point Installation Guide.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure Figure 19. Connecting Ethernet Lightning Surge Protector to the Connector 8 Tighten the Ethernet Gland nut. 9 Connect the Ethernet cable to the WLAN Security Switch (WSS). 10 Unscrew the Ethernet Gland nut on the right side of the Ethernet Lightning Surge Protector. 11 Remove the rubber washers from the Ethernet Gland. 12 Slide the Ethernet Gland nut onto the Ethernet cable.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure 67 2 Strip back cable jackets. 3 Terminate the data wires to the screw down terminal blocks. To pin out the Terminal strips refer Figure 20 . Figure 20. Terminal Strip Connection Warning! Avaya requires that the Access Point in the outdoor enclosure be powered with a Power Over Ethernet (POE) that is supplied only from an Avaya WSS 2350 or WSS 2360/2361 wireless security switch.
WLAN Series 2332 Outdoor Solution with AP Mounted in NEMA Enclosure set {ap port-list | dap dap-num} radio {1 | 2} antennatype {internal | 24143 | 24123 | 24113 | 24203 | 24403 | 24453 | 24493 | 24553 | 24883 | mixed | 24143-OUT | 24143-OUT-10 | 24143-OUT-25 | 24143-NEMA | 24143-NEMA-10 | 24143-NEMA-25 | 24123-OUT | 24123-OUT-10 | 24123-OUT-25 | 24123-NEMA | 24123-NEMA-10 | 24123-NEMA-25 | 24113-OUT | 24113-OUT-10 | 24113-OUT-25 | 24113-NEMA | 24113-NEMA-10 | 24113-NEMA-25 | 24493-OUT | 24493-OUT-10 | 24
Appendix 69 Appendix Supported antenna information Outdoor external antenna options The outdoor external antenna WSS model string relates directly to the base external antenna being used in the connection scenarios outlined previously. For example, WSS model string 24493-OUT would imply a configuration that includes the 10-foot plenum-rated R-SMA (M) to R-SMA (F) indoor RoHS compliant cable, the surge suppressor (DR4000085E5) and the S2403BPXN36RSM antenna (DR4000088E6).
Appendix Surge Suppression When installing the antenna in an outdoor configuration, the surge suppressor, DR4000085E5, is required to be inserted into the connection at or near the demarkation point from the building. Please refer to the following illustration for proper connection to the cables and proper grounding of the surge suppressor component. Figure 22. Cable connection and grounding Warning! A properly rated surge suppressor is required for any cable/antenna combination exiting the building.
Appendix 71 Cushcraft Table 13: Outdoor External Antenna Selection Guide Avaya WSS WLAN Series 2332 Access Points Model Model 2.4 GHz Antennas Number String S2403BPXN36RSM DR4000088E6 S2409PN36RSM DR4000076E6 WLAN Collinear Omni-directional Dipole Antenna that contains two collocated elements with an average gain of 4.9 dBi and a 3-foot cable with a Reverse SMA connector. For use in Warehouses, Auditoriums, Shopping Malls, industrial complexes and more.
Appendix Cushcraft PC2415NA36RSM Avaya Model Number WSS Model String WLAN Series 2332 Access Points 2.4 GHz Antennas 24883NEMA To be used with the outdoor NEMA enclosure only. Output power is compensated for the addition of the 10-foot plenum rated cable and the lightning protection circuitry. 24883NEMA-10 To be used with the outdoor NEMA enclosure only.
Appendix 73 Cushcraft Avaya Model Number WSS Model String WLAN Series 2332 Access Points 2.4 GHz Antennas 24143OUT-10 The "10" refers to the addition of the 10-foot outdoor-rated LMR-240 extension cable. Output power is compensated for the addition of the 10-foot plenum rated cable, the lightning protection circuitry and the 10-foot outdoor rated extension cable. 24143OUT-25 The "25" refers to the addition of the 25-foot outdoor-rated LMR-240 extension cable.
Appendix Cushcraft Avaya Model Number WSS Model String SR24120DN36RSM DR4000087E6 Cushcraft Model Number WLAN Series 2332 Access Points 2.4 GHz Antennas WLAN Directional Patch Panel Array Antenna with an average gain of 11 dBi, 3-foot cable with a Reverse SMA connector and either a tilt, wall or pole mounting capability. Antenna is rugged, easy to install and provides a very symmetrical and uniform 120 degree H-plane and 14 degree E-plane pattern. Designed for long, wide coverage environments.
Appendix 75 Cushcraft Model Number WSS Model String WLAN Series 2332 Access Points 5.0 GHz Antennas 5643NEMA-10 To be used with the outdoor NEMA enclosure only. Output power is compensated for the addition of the 10-foot plenum rated cable, the lightning protection circuitry and the 10-foot outdoor rated extension cable. 5643NEMA-25 To be used with the outdoor NEMA enclosure only.
Appendix Cushcraft S4901790PN36RS Model Number WSS Model String WLAN Series 2332 Access Points 5.0 GHz Antennas 5133OUT-10 The "10" refers to the addition of the 10-foot outdoor-rated LMR-240 extension cable. Output power is compensated for the addition of the 10-foot plenum rated cable, the lightning protection circuitry and the 10-foot outdoor rated extension cable. 5133OUT-25 The "25" refers to the addition of the 25-foot outdoor-rated LMR-240 extension cable.
Appendix 77 SR49120DAN36RS DR4000091E6 WLAN Directional Patch Panel Antenna with an average gain of 10.0 dBi from 5.15 - 5.25 GHz, 9.9 dBi from 5.25 - 5.35 GHz, 9.6 dBi from 5.470 - 5.725 GHz and 9.5 dBi from 5.725 - 5.85 GHz. It has a 3-foot cable with a Reverse SMA connector and either a wall or pole mounting capability. Antenna is rugged, easy to install and provides a very symmetrical and uniform 120 degree H-plane and 15 degree E-plane pattern. Designed for long, wide coverage environments.
Appendix Antenna properties and considerations In the design and installation of a WLAN system, system installers need to have some fundamental knowledge of antenna performance and RF propagation characteristics to ensure efficient performance of the network. This knowledge will assist these individuals with the proper selection of system antennas, as well as, guiding their decisions on antenna mounting location and orientation in an effort to ensure optimum system coverage and performance.
Appendix 79 Table 14: VSWR, % Reflected Power and Transmission Loss VSWR % Reflected Power Transmission Loss [dB] 1.0 : 1 0.00 0.00 1.1 : 1 0.23 0.01 1.2 : 1 0.83 0.04 1.5 : 1 4.00 0.18 2.0 : 1 11.11 0.51 2.5 : 1 18.37 0.88 3.0 : 1 25.00 1.25 Radiation Patterns and 3-dB Beamwidth The radiation patterns of an antenna describe how the antenna directs the energy it radiates. As stated earlier, an antenna cannot radiate more total energy than is delivered to its input.
Appendix If we double the length of the aperture, the gain of the antenna is doubled, which means the gain increases by 3 dB. An antenna's efficiency is a measure of the ratio of the gain of an antenna to its directivity. If an antenna were 100% efficient, it would have a gain equal to its directivity. The VSWR provides an indication of how closely the impedance of an antenna matches the impedance of the connecting access point.
Appendix 81 With linearly polarized antennas, the polarization of each antenna must be of the same orientation to achieve maximum energy transfer between the two antennas. If the two linearly polarized antennas are not identically oriented, there will be a reduction in energy transfer due to polarization mismatch. The table below provides a summary of polarization mismatch loss between two linearly polarized antennas that do not have the same angular orientation.
Appendix Bandwidth The term bandwidth simply defines the frequency range over which an antenna meets a certain set of performance criteria. The important issue to consider regarding bandwidth is the performance tradeoffs between all of the properties described above as the bandwidth is widened to cover more area. Summary of Related Performance Tradeoff Issues The antenna properties described above are all related in varying degrees.
Appendix 83 Table 17: Path loss in [dB] for loss coefficient of n=2 Frequency (MHz) Distance 2400 (m) 2450 2500 5150 5250 5350 5470 5725 5850 10 -60.0 -60.2 -60.4 -66.7 -66.8 -67.0 -67.2 -67.6 -67.8 50 -74.0 -74.0 -74.4 -80.7 -80.8 -81.0 -81.2 -81.6 -81.8 100 -80.0 -80.0 -80.4 -86.7 -86.8 -87.0 -87.2 -87.6 -87.8 150 -83.6 -83.6 -83.9 -90.2 -90.4 -90.5 -90.7 -91.1 -91.3 200 -86.1 -86.1 -86.4 -92.7 -92.9 -93.0 -93.2 -93.6 -93.8 250 -88.0 -88.
Appendix In addition to the free space path loss mentioned above, RF signals will be attenuated as they pass through objects such as foliage, walls and buildings. The level of signal attenuation in these instances can increase the loss and reduce the communications range by an additional amount of 10 to 20 dB or greater. Care should be used when installing the antennas and access points to ensure that no objects or barriers are blocking the communication paths of the antennas.
Appendix 85 Antenna descriptions – 802.11a (5.0 GHz) antennas 1 Order Number: DR4000070E6 z Wide-band Omni Antenna z Cushcraft Model S5153WBPN36RSM z 5.15 - 5.25 GHz, 4.5 dBi Peak Gain z 5.25 - 5.35 GHz, 3.8 dBi Peak Gain z 5.47 - 5.725 GHz, 4.7 dBi Peak Gain z 5.725 - 5.85 GHz, 4.
Appendix Azimuth Pattern S5153WBPN36RSM 350355 5 340345 335 330 325 0 320 315 -5 310 305 300 -10 0 5 10 15 20 295 290 285 25 5.15 GHz 30 35 40 5.47 GHz 5.85 GHz 45 50 55 60 65 70 -15 75 -20 280 80 275 85 -25 270 90 265 95 260 100 255 105 250 110 245 240 235 230 225 220 215 210 205 200 195190 185 115 180 120 125 130 135 140 145 150 155 160 165 175170 NN47250-506 (324883-B Rev 02 Version 02.
Appendix 87 Elevation Pattern S5153WBPN36RSM 3 dB BW = 15 Deg 1 dB BW = 8 Deg 350355 5 340345 335 330 0 325 320 315 -5 310 305 -10 300 295 290 285 280 0 -15 5 10 15 20 25 5.15 GHz 30 35 5.47 GHz 5.
Appendix 2 Order Number: DR4000071E6 z High-Gain Directional Panel Antenna z Cushcraft Model S51514WPN36RSM z 5.15 - 5.25 GHz, 13.1 dBi Peak Gain z 5.25 - 5.35 GHz, 13.0 dBi Peak Gain z 5.47 - 5.725 GHz, 13.0 dBi Peak Gain z 5.725 - 5.85 GHz, 12.9 dBi Peak Gain z Weatherproof housing for indoor/outdoor deployments z Wall or pole mounting z Articulating feature allows customizable antenna pattern z Measures 4” x 4” x 1.4” NN47250-506 (324883-B Rev 02 Version 02.
Appendix 89 Azimuth Pattern S51514WPN36RSM 3 dB BW = 33 Deg 1 dB BW = 18 Deg 350355 15 340345 335 330 325 5 320 315 310 -5 305 300 295 290 285 0 5 10 15 20 25 30 35 5.15 GHz 5.47 GHz 5.
Appendix Elevation Pattern S51514WPN36RSM 3 dB BW = 27 Deg 1 dB BW = 15 Deg 350355 15 340345 335 330 10 325 320 5 315 0 310 305 -5 300 295 290 285 0 5 10 15 20 -10 25 30 35 5.15 GHz 5.47 GHz 5.
Appendix 91 3 High-Gain Directional Panel Antenna z Order Number: DR4000090E6 z Cushcraft Model S4901790PN36RS z 5.15 - 5.25 GHz, 15.7 dBi Peak Gain z 5.25 - 5.35 GHz, 15.9 dBi Peak Gain z 5.470 - 5.725 GHz, 16.0 dBi Peak Gain z 5.725 - 5.85 GHz, 15.8 dBi Peak Gain z Wall or pole mounting available for 1.5" to 3.5" diameter pole giving up to 15° of down-tilt z Symmetrical and uniform 90 degree H-plane and 5.5 degree E-plane patterns z Measures 2.74" in diameter x 24.
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 93 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 95 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 97 4 High-Gain Directional Panel Antenna z Order Number: DR4000091E6 z Cushcraft Model SR49120DAN36RS z 5.15 - 5.25 GHz, 10.0 dBi Peak Gain z 5.25 - 5.35 GHz, 9.9 dBi Peak Gain z 5.470 - 5.725 GHz, 9.6 dBi Peak Gain z 5.725 - 5.85 GHz, 9.5 dBi Peak Gain z Wall or pole mounting options available z Symmetrical and uniform 120 degree H-plane and 15 degree E-plane patterns z Measures 1" x 2.4" x 9.
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 99 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 101 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 103 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix Antenna descriptions – 802.11b/g (2.4GHz) antennas 5 Order Number: DR4000088E6 z Omnidirectional Colinear Dipole Antenna z Cushcraft Model S2403BPXN36RSM z 2.4-2.5GHz, 4.9 dBi Gain z Indoor/outdoor deployments z Ideal for large open areas z Pole or suspended ceiling mount z Measures 11.5” x 1” NN47250-506 (324883-B Rev 02 Version 02.
Appendix 105 Azimuth Pattern S2403BPXN36RSM 355 345 350 5 340 335 330 325 0 320 315 310 -5 0 5 10 15 20 25 30 35 2412 MHz 2437 MHz 2462 MHz 40 45 50 55 305 -10 300 295 290 60 65 70 -15 285 75 -20 280 80 85 275 -25 270 90 265 95 100 260 105 255 250 110 245 115 240 120 235 230 225 220 215 210 205 200 195 190 125 185 180 175 130 135 140 145 150 155 160 170 165 dBi Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix Elevation Pattern S2403BPXN36RSM 345 350 340 335 330 325 320 315 310 305 300 355 0 5 5 10 15 0 20 25 30 2412 MHz 2437 MHz 2462 MHz 35 40 -5 45 50 55 -10 60 -15 295 290 70 -20 285 280 80 85 -30 270 90 Deg = Horizon 75 -25 275 Zero Deg = Overhead 65 90 265 95 100 260 105 255 110 250 115 245 120 240 125 235 230 225 220 215 210 205 200 195 190 185 180 175 130 135 140 145 150 155 160 170 165 NN47250-506 (324883-B Rev 02 Version 02.
Appendix 107 6 Order Number: DR4000076E6 z Directional Panel Antenna z Cushcraft Model S2409PN36RSM z 2.4-2.5GHz, 8.8 dBi Gain z Indoor/Outdoor deployments z Well-suited for wall mounting applications z Good for hallways and corridors where multi-path and scattering can be a problem z 3 foot cable z Measures only 6” x 6” x 1.
Appendix Azimuth Pattern S2409PN36RSM 3 dB BW = 66 Deg 1 dB BW = 30 Deg 355 345350 10 340 335 330 5 325 320 315 0 310 305 300 295 290 0 5 10 15 20 25 2412 MHz 30 35 2437 MHz 2462 MHz 40 45 50 55 -5 65 70 -15 285 280 Zero Deg = Broadside 60 -10 75 80 -20 275 85 -25 270 90 95 265 260 100 255 105 110 250 245 115 240 235 230 225 220 215 210 205 200 195190 185 120 180 125 130 135 140 145 150 155 160 165 175170 NN47250-506 (324883-B Rev 02 Version 02.
Appendix 109 Elevation Pattern S2409PN36RSM 3 dB BW = 55 Deg 1 dB BW = 31 Deg 355 345350 10 340 335 330 5 325 320 0 315 310 305 300 295 290 285 0 5 10 15 20 25 2412 MHz 30 35 2437 MHz 2462 MHz 40 45 50 55 -5 60 -10 70 280 -25 270 -30 90 Deg = Broadside 75 -20 275 Zero Deg = Overhead 65 -15 80 85 90 95 265 260 100 255 105 110 250 245 115 240 235 230 225 220 215 210 205 200 195190 185 120 180 125 130 135 140 145 150 155 160 165 175170 dBi Avaya WLAN 2332 Series Outdoor
Appendix 7 Order Number: DR4000086E6 z Directional Patch Panel Array z Cushcraft Model S241290PN36RSM z 2.4-2.5GHz, 12 dBi Gain z Outdoor deployments z 90 degree H-plane and 17 degree E-plan z Designed for long, wide coverage environments z 3 foot cable with tilt mount available z Measures 26" x 3" x 1" NN47250-506 (324883-B Rev 02 Version 02.
Appendix 111 Horizontal Polarization BW = 64 Deg Azimuth Pattern S241290PN36RSM Vertical Polarization 355 345350 15 340 335 330 10 325 320 5 315 310 305 300 295 290 285 0 5 10 15 20 2.40 GHz 25 30 2.45 GHz 35 2.
Appendix NN47250-506 (324883-B Rev 02 Version 02.
Appendix 113 8 Order Number: DR4000087E6 z Directional Patch Panel Array z Cushcraft Model SR24120DN36RSM z 2.4-2.
Appendix Horizontal Polarization BW = 105 Deg Azimuth Pattern SR24120DN36RSM Vertical Polarization 355 345350 15 340 335 330 10 325 320 5 315 310 305 300 295 290 285 0 5 10 15 20 2.40 GHz 25 30 2.45 GHz 35 2.50 GHz 40 45 50 55 0 -5 60 65 -10 70 75 -15 280 275 -20 270 -25 80 85 90 265 95 260 100 255 105 250 110 245 115 240 235 230 225 220 215 210 205 200 195190 185 120 180 125 130 135 dBi 140 145 150 155 160 165 170 175 NN47250-506 (324883-B Rev 02 Version 02.
Appendix 115 Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix 9 Order Number: DR4000077E6 z Directional Yagi Antenna z Cushcraft Model PC2415NA36RSM z 2.4-2.5GHz, 14.1 dBi Gain z Indoor/Outdoor deployments z Articulating mount for precise direction z Good for long and narrow zones like tunnels z 3 foot cable z Measures 26.5” x 3.75” x 1.5” NN47250-506 (324883-B Rev 02 Version 02.
Appendix 117 Azimuth Pattern PC2415NA36RSM 3 dB BW = 25 Deg 1 dB BW = 13 Deg 355 345350 15 340 335 330 10 325 320 5 315 310 305 300 295 290 285 0 5 10 15 20 25 2412 MHz 30 35 2437 MHz 2462 MHz 40 45 50 55 0 Zero Deg = End of Antenna 60 -5 65 -10 70 75 -15 280 275 -20 270 -25 80 85 90 95 265 260 100 255 105 110 250 245 115 240 235 230 225 220 215 210 205 200 195190 185 120 180 125 130 135 140 145 150 155 160 165 175170 dBi Avaya WLAN 2332 Series Outdoor Solution Guide
Appendix Elevation Pattern PC2415NA36RSM 3 dB BW = 30 Deg 1 dB BW = 16 Deg 355 345350 15 340 335 330 10 325 320 5 315 310 0 305 300 295 290 0 5 10 15 20 25 2412 MHz 30 35 2437 MHz 2462 MHz 40 45 50 55 -5 60 -10 70 -15 285 -25 270 -30 90 Deg = End of Antenna 75 -20 280 275 Zero Deg = Overhead 65 80 85 90 265 95 260 100 255 105 250 110 245 115 240 235 230 225 220 215 210 205 200 195190 185 120 180 125 130 135 140 145 150 155 160 165 175170 NN47250-506 (324883-B R
Appendix 119 Mounting of Ethernet Lightning Surge Protector The following figures show the AL-CAT5 Dimensions for mounting the Ethernet Lightning /Surge Protector. Figure 23. Top view Figure 24.
Appendix Figure 25. Side view Figure 26. Mounting screws NN47250-506 (324883-B Rev 02 Version 02.
