Product Manual

Wiring and Installation instructions for North American
Signal Company part #’s: LEDQO-A and LEDQR-A
1. Each unit should include the LED head, 10’ connector cable, and rubber
grommet
2. Insert rubber grommet insuring that the lip of the grommet is clear of the
hole and the grommet fits correctly
3. Follow these instructions-
A. Red wire connects to positive
B. Black wire connects to ground
C. White wire is used to connect 2 heads together for alternating quad
flash display. Insert cable into both female bullet connectors for
alternating pattern. Use is optional.
4. Insert the LED head starting with one edge then pushing the remainder of
the head into the grommet