Installation Guide
Frequently aSkeD queStionS CONTINUED
How do I change my pump speed? Depending on the type of pump, you
will need to either move the slider or turn the knob.
How do I clean my pump?
1. Disconnect the power supply and then remove pump cover/lter.
2. Gently pull impeller/rotor assembly out of the pump housing
3. Rinse the impeller/rotor assembly and the cavity with clean water.
4. If your pump comes with a sponge lter rinse this with clean water.
Algae buildup can be ushed out with a garden hose.
How do I level the water feature?
For the water to ow properly, it is critical the water feature is level. If your
water feature will be placed in an area with uneven ground, use a level and
leveling shims to help level the water feature. Shims are wedge-shaped plastic
parts that can be placed between the water feature and the ground to create a
level surface.
My tube is too long. What can be done to x this?
The hose can be cut with a sharp blade or pair of scissors to the desired
length.
NSD10006 aSSembly inStructionS