Installation Guide

Place mounting bracket (E) on wall in desired location.
Ensure it is level and mark holes. Drill 6 mm (1/4") pilot
holes on the marked spots and insert (3) anchors (L).
(If fastening to studs, skip this step.)
Secure mounting bracket (E) to wall with (3) supplied
screws (K) and hang fountain.
Place the cord channel (G) on the wall and mark the holes.
Drill 6 mm (1/4") pilot holes on the marked spots and
insert (2) anchors (L). (If fastening to studs, skip this step.)
Optional, if not using cord covers skip to step 6.
NSD10006 aSSembly inStructionS