Installation Guide

51011PlbZ aSSembly inStructionS

Final StePS

Fill the reservoir with distilled

water between the ll lines.

Place the splash guards (C) and

(D) into the fountain body.

Connect the light connectors (I)

and (J) and screw the cap tightly.

Plug light transformer (I) and

pump (H) into outlets and turn

light on at switch.

Note: Light does not have to be on to operate pump.

Attach the cord channel (G) to the wall with (2) supplied

screws (K). Place cords inside the cord channel (G) and

press the (2) cord covers (F) rmly on channel to secure.

NSD10006 aSSembly inStructionS