MODEL: NSD10024 PACKING DIAGRAM �TRANSFORMER AND LIGHT LOWER BASE'---------C��? �UMP AND (3) SHIMS ,__....,__ PUMP ACCESS DOOR -�----lYROFOAM: 16 KGS. SlYROFOAM: 16 KGS. �PPER COLUMN LOWER RESERVOI i--SlYROFOAM: 16 KGS. SlYROFOAM: 16 KGS.--i UPPER BASE------SlYROFOAM: 16 KGS.
You should have received the following parts in the package. Please ensure that all parts are accounted for.
Care and Instruction Manual FPO
NSD10024 ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Choose a location: This freestanding water feature is attractive from all sides and can be used to highlight almost any area.
NSD10024 ASSEMBLY INSTRUCTIONS Place upper base (B) onto base (A) and rotate it clockwise to secure. Place lower reservoir (C) onto upper base (B) and rotate it clockwise to secure. C B B A Feed light power cord (K) then pump power cord (I) through plastic tube. Cord should exit through notch in lower base (A). Place lights (K) into light holders.
NSD10024 ASSEMBLY INSTRUCTIONS Place lower column (D) into lower reservoir (C) and twist it clockwise to secure. D C Place upper reservoir (E) onto lower column (D) and rotate it clockwise to secure.
NSD10024 ASSEMBLY INSTRUCTIONS Feed rubber hose through plastic tube. Place upper column (F) into upper reservoir (E) and twist it clockwise to secure. Attach pump (I) to the rubber hose. F Rubber hose Plastic tube Rubber hose E I FINAL STEPS Place pump access door (G) to cover entry of lower column (D). Fill reservoirs (C, E) with distilled water. Water level should stay above fill line on pump access door when fountain is running.
NSD10024 ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup. Tube Rotor/Impeller Impeller cover Back cover Pump housing Suction cup Front cover Flow regulator If the pump fails to run: • Check circuit breaker, or try a different outlet. • Check tubing for kinks and obstructions.
NSD10024 ASSEMBLY INSTRUCTIONS WATER FEATURE WARNINGS & TROUBLESHOOTING • Splashing may occur when the fountain is first turned on, protect surrounding surfaces as needed. Do not place the water feature on or near any surface that can be damaged by water. • Distilled water is recommended to reduce mineral deposits, bacteria build up and algae that may damage the water feature basin and pump. • To reduce the risk of electrical shock, always disconnect the power supply before working with the water feature.
NSD10024 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
NSD10024 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How much water do I need to keep in the water feature? Where possible in our water features, we have included fill lines to help you visualize the water level required for proper function. If your water feature does not include fill lines, please check the instruction manual for water capacity.
NSD10024 ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED How do I change my pump speed? Depending on the type of pump, you will need to either move the slider or turn the knob. Flow control valve Maximum Minimum How do I clean my pump? 1. Disconnect the power supply and then remove pump cover/filter. 2. Gently pull impeller/rotor assembly out of the pump housing 3. Rinse the impeller/rotor assembly and the cavity with clean water. 4.