User Guide
Table Of Contents
- APPLICABILITY TABLE
- CONTENTS
- 1. Introduction
- 2. General Product Description
- 3. PINS ALLOCATION
- 4. Power Supply
- 5. DIGITAl SECTION
- 6. RF SECTION
- 7. AUDIO SECTION
- 8. GNSS Section
- 9. Mechanical Design
- 10. APPLICATION PCB Design
- 11. PACKAGING
- 12. Conformity Assessment Issues
- 13. PRODUCT AND SAFETY INFORMATION
- 14. GLOSSARY
- 15. Document History
ME910G1 Hardware Design Guide
1VV0301593 Rev.15 Page
16 of 100 2022-08-23
Not Subject to NDA
Band
REFsens (dBm)
Typical
3GPP REFsens (dBm)*
3GPP limit
CAT NB2 / Band2
-116.2 -108.2
CAT NB2 / Band3
-116.4 -108.2
CAT NB2 / Band4
-115.6 -
CAT NB2 / Band5
-116.5
-108.2
CAT NB2 / Band8
-115.9 -108.2
CAT NB2 / Band12
-116.6 -108.2
CAT NB2 / Band13
-116.8 -108.2
CAT NB2 / Band18
-116.6
-108.2
CAT NB2 / Band19
-116.4 -108.2
CAT NB2 / Band20
-116.0 -108.2
CAT NB2 / Band25
-116.2 -
CAT NB2 / Band26
-116.1
-108.2
CAT NB2 / Band28
-116.8 -108.2
CAT NB2 / Band66
-115.6 -108.2
CAT NB2 / Band71
-113.7 -
CAT NB2 / Band85
-116.0
-
GPRS / GSM850
-110.0 -104.0
GPRS / GSM900
-110.0 -104.0
GPRS / DCS1800
-109.6 -104.0
GPRS / PCS1900
-109.0
-104.0
Table 9: RX Sensitivity ME910G1-WW and ME910G1-WWV
* 3GPP TS 36.521-1 Release 15 Minimum performance requirement
**GPRS sensitivity table using GMSK CS2: *BLER <10%, CS2 According to 3GPP 51.010-1
ME910G1-W3
Band
REFsens (dBm)
Typical
REFsens (dBm)*
3GPP limit
CATM1 / Band1
-107.5
-102.7
CAT M1 / Band2
-107.6 -100.3
CAT M1 / Band3
-105.7
-99.3
CAT M1 / Band4
-107.6 -102.3