User Guide
Table Of Contents
- APPLICABILITY TABLE
- CONTENTS
- 1. Introduction
- 2. General Product Description
- 3. PINS ALLOCATION
- 4. Power Supply
- 5. DIGITAl SECTION
- 6. RF SECTION
- 7. AUDIO SECTION
- 8. GNSS Section
- 9. Mechanical Design
- 10. APPLICATION PCB Design
- 11. PACKAGING
- 12. Conformity Assessment Issues
- 13. PRODUCT AND SAFETY INFORMATION
- 14. GLOSSARY
- 15. Document History
ME910G1 Hardware Design Guide
1VV0301593 Rev.15 Page
28 of 100 2022-08-23
Not Subject to NDA
Table 15:GPS Mode *reference signal @-130 dbm with static scenario
Note
: The reported LTE CAT M1 and LTE CAT NB1 idle mode values
are an average among all product variants and bands for each
network wireless technology.
Support of specific network wireless technology depends on the
product variant configuration.
ME910G1-W1 Connected Mode
Table 16: ME910G1-W1 Connected Mode
Mode
Measure*
(Typical)
Mode Description
GPS
(mA)
Active State
(GNSS ON, CFUN=4)
Acquisition 69.3
GPS+GLO, DPO off
Navigation
22
GPS+GLO, DPO on DWELL=280ms
55.9
GPS+GLO, DPO off
Active State
(GNSS ON, CFUN=5
eDRX)
Acquisition 68.5
GPS+GLO, DPO off
Navigation
15.7
GPS+GLO, DPO on DWELL=280ms
54
GPS+GLO, DPO off
Mode
Measure
(Typical)
Mode
Description
Connected mode
Average
(mA)
Peak
(mA)
CATM
180 400
1 RB, RMC, TBS=5, QPSK, 21dBm,
all bands
NBIoT
245 340 3.75KHz, 1 SC, RU 32ms, TBS=0, BPSK, 20dBm, all bands
65 290
15KHz, 12 SC, RU 1ms, TBS=5, QPSK,
21dBm, all bands