User Guide

ME910G1 Hardware Design Guide
1VV0301593 Rev.15 Page
87 of 100 2022-08-23
Not Subject to NDA
Max Gain for FCC (dBi)
Band
ME910G1-W1
ME910G1-WW
ME910G1-WWV
ME910G1-W3
GSM 850
---
---
8.4
---
GSM 1900
---
---
10.0
---
GPRS/EGPRS 850
---
6.9
6.9
---
GPRS/EGPRS 1900
---
2.5
2.5
---
FDD 2
11.0
8.0
8.0
8.0
FDD 4
8.0
5.0
5.0
5.0
FDD 5
12.4
9.4
9.4
9.4
FDD 12
11.6
8.6
8.6
8.6
FDD 13
12.1
9.1
9.1
9.1
FDD 14
FDD 25
11.0
8.0
8.0
8.0
FDD 26
12.3
9.3
9.3
9.3
FDD 66
8.0
5.0
5.0
5.0
FDD 71
11.4
11.4
11.4
---
FDD 85
11.6
8.6
8.6
8.6
FDD 86
12.1
9.1
---
---
FDD 8_39d
11.9
8.9
---
9.8
Table 49: Max Gain for FCC (dBi)
12.3.1.5. FCC Labelling Requirements for the Host Device
The host device shall be properly labelled to identify the modules within the host device.
The certification label of the module shall be clearly visible at all times when installed in
the host device, otherwise the host device must be labelled to display the FCC ID of the
module, preceded by the words "Contains transmitter module", or the word "Contains",
or similar wording expressing the same meaning, as in the below table.
Model
FCC ID
ME910G1-W1
Contains FCC ID: RI7ME910G1W1
ME910G1-WW
Contains FCC ID: RI7ME910G1WW
ME910G1-WWV
ME910G1-W3
Contains FCC ID: RI7ME910G1W3
Table 50:Host device FCC label