User Guide
Table Of Contents
- APPLICABILITY TABLE
- CONTENTS
- 1. Introduction
- 2. General Product Description
- 3. PINS ALLOCATION
- 4. Power Supply
- 5. DIGITAl SECTION
- 6. RF SECTION
- 7. AUDIO SECTION
- 8. GNSS Section
- 9. Mechanical Design
- 10. APPLICATION PCB Design
- 11. PACKAGING
- 12. Conformity Assessment Issues
- 13. PRODUCT AND SAFETY INFORMATION
- 14. GLOSSARY
- 15. Document History
ME910G1 Hardware Design Guide
1VV0301593 Rev.15 Page
98 of 100 2022-08-23
Not Subject to NDA
15. DOCUMENT HISTORY
Revision
Date
Changes
15
2022-07-27 “B86” has been 3GPP standardized as B103
Antenna aperture Tuning Application note not yet available
Added Switched off power consumption
CONFORMITY ASSESSMENT ISSUES Chapter updated
14
2022-04-08 Forced USB Boot chapter added
B14 removed in chapter 2.5.1 for ME910G1-W1 variant
Figure 26: right title set
Figure 24: box filled up
UKCA for W3 variant
Anatel restricted radiation statement removed
2.7.1 thickness without label
9.1 drawing: without label
13
2022-01-13 Added ME310G1-W3
Added RX sensitivity and power consumption
UKCA in draft
12
2021-09-24 Chap 1.2 alignment to ME310 HUG
Chap 1.5 document list updated
Chap 4.3.1.3 change battery peaks of current up to 2A
Chap 5.7.3.1 remove indication of SW flow control in the note
Chap 12.4 added
UCKA reference removed until final approvals from Approved Body UK
Language reviewed
11
2021-08-19
Revision released for certification purpose. Not distributed.
UKCA certification added
10
2021-08-05 Added B86 (US upper 700MHz band) to WW product
Chapter 12, update
9
2021-04-22 Added B8_39d (US 900Mhz band) to W1 and WW products
8
2021-02-22 Section 3.2, LGA pads layout correction
7
2021-02-02 Reviewed template design and styles
Section 2.4, update
Chapter 4, update
Sections 6.1, 6.2, 6.3, removed (redundant)
Section 7.2, removed