User Guide
Table Of Contents
- APPLICABILITY TABLE
- CONTENTS
- 1. Introduction
- 2. General Product Description
- 3. PINS ALLOCATION
- 4. Power Supply
- 5. DIGITAl SECTION
- 6. RF SECTION
- 7. AUDIO SECTION
- 8. GNSS Section
- 9. Mechanical Design
- 10. APPLICATION PCB Design
- 11. PACKAGING
- 12. Conformity Assessment Issues
- 13. PRODUCT AND SAFETY INFORMATION
- 14. GLOSSARY
- 15. Document History
ME910G1 Hardware Design Guide
1VV0301593 Rev.15 Page
99 of 100 2022-08-23
Not Subject to NDA
Revision
Date
Changes
Section 8.4, measurements update
Section 2.2, 2.5, 12.3, adding B86 update
6
2020-09-14 Section 2.5, TX Power update
Section 2.8, Temperature range update
Chapter 12, Conformity assessment update
5
2020-07-22 Conformity assessment update with ANATEL
4
2020-06-18 The title of chapter 5.7.3.2 has been changed from "Modem serial port
2" in "Modem serial port 2 (USIF1)".
The title of chapter 5.7.3.1 has been changed from "Modem serial port
1" in "Modem serial port 1 (USIF0)".
In the table of chapter 3.1, the "Asynchronous serial port" section title
has been changed in "Asynchronous serial port (USIF0)".
3
2020-06-10 Conformity assessment update
TX Output Power update
Power Consumption section update
GNSS Section update
Applicability table update
2
2020-01-23 Conformity assessment update
Power consumption figures update
RX Sensitivity figures update
RF Section update
Pull-up/down values update
1
2019-08-29 Bands support updating
Added ME910G1-WW
Temperature range update
Added power consumption figures
Removed B14
Extended Voltage Range lower limit change
0
2019-04-12 First issue
From Mod.0818 rev.4