Filt e r D - S U B A d a p ters, Filter plates Section 4 Filter D-SUB Adapters, Filter plates In some cases EMC problems do not become apparent until after a device has been put into service where it is exposed to interference in its installed location. Ambient conditions and the device influence one another mutually. Devices with high rates of data transfer or many devices operating simultaneously at different frequencies can cause mutually disruptive interference that prevents satisfactory operation.
Filter D-SUB A dapters, Fi l t e r p l a t e s Retrofit to the existing D-SUB interface connector, this can prove to be the solution to many different EMC problems. The CONEC team will be glad to help you select the right product.
Filt e r D - S U B A d a p ters, Filter Plates Part Number Creator 2 4 3 A 1105 O X Product Line Design 3 = Adapter, standard DWV 4 = Adapter, high DWV 9* = Adapter, ultra high DWV *on request Quality class for contacts A = Quality class 3 50 mating cycles B = Quality class 2 200 mating cycles C = Quality class 1 500 mating cycles Serial number Design OX = Standard design Filter connectors for higher DWV Increasing requirements, with respect to higher DWV for filter connectors, have induced us to carry
Filter D-SUB A dapters, Fi l t e r P l a t e s Technical Data Materials Filter D-SUB Adapter 9, 15, 25, 37 and 50 position Filter D-SUB Adapter High-Density 15-, 25-, 44-, and 78 position Insulator Polyester GF UL94 V-0 Contacts CU alloy Contact plating Gold plated over nickel Shell Steel tin plated brass tin plated Mechanical and electrical characteristics Dielectric with standing voltage • Standard • Standard • High DWV • Ultra high DWV • Ultra high DWV 424 VDC 300 VDC 707 V
Filt e r D - S U B A d a p ters, Filter Plates Insertion loss C-Filter with planar filter technology C-Filter with chip technology 4| 4
Filter D-SUB A dapters, Fi l t e r P l a t e s Insertion loss LC-Filter with planar filter technology π-Filter with planar filter technology 4| 5
Filt e r D - S U B A d a p ters, Filter Plates C-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Description Mounting styles: - with 4-40 UNC or M3 jack screw - with 4-40 UNC or M3 hex bolt Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Version with jack screw No. of pos. A -0.76 B1 -0.25 B2 +0.25 09 31.19 16.46 16.79 25.
Filter D-SUB A dapters, Fi l t e r P l a t e s C-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Order data Capacitance 370 pF Socket connector Plug connector with jack screw No. of pos.
Filt e r D - S U B A d a p ters, Filter Plates C-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Low profile Description Mounting style: with 4-40 UNC or M3 jack screw Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing No. of pos. A -0.76 B1 -0.25 B2 +0.25 09 31.19 16.46 16.79 25.00 C + 0.12 - 0.13 D -0.3 15 39.52 24.79 25.12 33.
Filter D-SUB A dapters, Fi l t e r P l a t e s C-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Low profile Order data Capacitance 370 pF Socket connector Plug connector with jack screw No. of pos. Mounting style 09 15 25 37 50 4-40 UNC Jack screw 4-40 UNC Jack screw 4-40 UNC Jack screw 4-40 UNC Jack screw 4-40 UNC Jack screw Socket connector Plug connector with jack screw Part Number 243 A 10010 243 A 10020 243 A 10030 243 A 10040 243 A 10130 X X X X X No.
Filt e r D - S U B A d a p ters, Filter Plates LC-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Description Mounting styles: - with 4-40 UNC or M3 jack screw - with 4-40 UNC or M3 hex bolt Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Version with jack screw No. of pos. A -0.76 B1 -0.25 B2 +0.25 09 31.19 16.46 16.79 25.
Filter D-SUB A dapters, Fi l t e r P l a t e s LC-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Order data Capacitance 370 pF Socket connector Plug connector with jack screw No. of pos.
Filt e r D - S U B A d a p ters, Filter Plates π-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Description Mounting styles: - with 4-40 UNC or M3 jack screw - with 4-40 UNC or M3 hex bolt Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Version with jack screw No. of pos. A -0.76 B1 -0.25 B2 +0.25 09 31.19 16.46 16.79 25.
Filter D-SUB A dapters, Fi l t e r P l a t e s π-Filter D-SUB Adapter Socket connector Plug connector – Precision machined contacts – Full Metal Order data Capacitance 2 x 370 pF Socket connector Plug connector with jack screw No. of pos.
Filt e r D - S U B A d a p ters, Filter Plates C-Filter D-SUB Adapter – High Density Socket connector Plug connector – Precision machined contacts – Low profile Description Mounting style: with 4-40 UNC or M3 jack screw Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing C-Filter design No. of pos. A -0.76 B1 -0.25 B2 +0.25 15 31.19 16.46 16.79 25.00 C + 0.12 - 0.13 D -0.
Filter D-SUB A dapters, Fi l t e r P l a t e s LC-Filter D-SUB Adapter – High Density Socket connector Plug connector – Precision machined contacts – Low profile Description Mounting style: with 4-40 UNC or M3 jack screw Quality class 3 (also available in quality class 1) Shell: Steel tin plated RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing LC-Filter design No. of pos. A -0.76 B1 -0.25 B2 +0.25 15 31.19 16.46 16.79 25.00 C + 0.12 - 0.13 D -0.
Filt e r D - S U B A d a p ters, Filter Plates C-Filter D-SUB Adapter – High Density Socket connector Plug connector – Precision machined contacts – Special design Description Special design: 64 contacts in 78 pos. shell Impulse withstand voltage 2500 KV (10 700 µs) Working voltage 1000 VDC Mounting styles: - with 4-40 UNC hex bolt - with 4-40 UNC threaded insert Quality class 1 (other quality classes on request) Shell: Steel tin plated RoHS compliant – CSA listed, File No.
Global EMV concepts start at the interfac CONEC Filter connectors Integration of connectors with filter saves space on the printed board and reduced EMI RFI problems. CONEC offers a wide range of connectors with single and multi-level filter technology. Today CONEC connectors are a compact component of optimal screening concepts. CONEC – intelligent EMI RFI protection for your application.
Filt e r D - S U B A d a p ters, Filter plates C- and π-filter plates CONEC EMI filter plates are used in modules or systems where the transmission of clean, interference-free signals is a top priority. Filter plates are simple to install, they are either mounted directly on the enclosure or even directly onto the PC board. Mounting holes are provided to fasten the filter plate with screws or rivets.
Filter D-SUB A dapters, Fi l t e r p l a t e s Part Number Creator CFP 1 B 2 0 8 C 101 1 X Product line Lead spacing configuration 1 = Lead spacing .100" 2.54 mm 2 = Lead spacing .079“ 2.00 mm Base plate size A = 1.060“ B = 1.560“ C = 2.560“ D = 3,560“ 26.92 mm 39.62 mm 65.02 mm 90.42 mm x x x x = .500“ = .500“ = .500“ = .500“ (only in C-Filter available) 12.70 mm 12.70 mm 12.70 mm 12.70 mm Number of rows 1 = Single row (buttom row) 2 = Double rows Number of filter per row .100“ 2.
Filt e r D - S U B A d a p ters, Filter Plates Overview C- and π-Filter Plates Description C- or -Filter Plates lead spacing .100" 2.54 mm, 1-row Round contact Ø .025“ 0.64 mm Number of positions: 1-21 filter contacts Designs: - straight - 90° left - 90° right - 90° both Diverse filter capacitance Description C- or -Filter Plates lead spacing .100“ 2.54 mm, 1-row Square end pin .025“ 0,64 x .
Filter D-SUB A dapters, Fi l t e r P l a t e s Overview C- and π-Filter Plates Description C- or -Filter Plates lead spacing .100“ 2.54 mm, 2-row Square end pin .025“ 0,64 x .025“ 0,64 mm Number of positions: 2-42 filter contacts Design: Straight Diverse filter capacitance Description C- or -Filter Plates lead spacing .079“ 2.00 mm, 1-row Round contact Ø .020“ 0.