Manual

ManualsBrandsNorthern Connectors ManualsHardwareConec D-Sub Filter Connectors

In applications where connectors penetrate shielded

enclosures commonly represent a breakdown in

shielding since the connector’s plastic isolating body

provides no shielding against any interference signals

that may be present.

Therefore high frequency interference signals can be

passed in or out of the system without hindrance.

The connector’s contacts act as antennas that receive

and transmit interference signals because filtering is

typically implemented on the PC board.

Interface connectors with integrated filters can be

of benefit in these cases.

CONEC filter D-subminiature connectors contribute

to the protection of EMC zones. The intergrated

filter inside the connector saves PCB-space and

can be installed into an existing PCB layout. To

replace an unfiltered connector into filtered one

is simple and effective.

Fil te r D- SU B Co nn ec to rs

Section 3

Filter D-SUB Connectors

At increasing data transfer rates and operating frequencies it

becomes increasingly important to safeguard the function of

electrical devices and systems in their interactive relationship so

that operation can be free of interference. This is also the clear

objective of the EMC law.

Summary of content (74 pages)

PAGE 1
Filt e r D - S U B C o n n ectors Section 3 Filter D-SUB Connectors At increasing data transfer rates and operating frequencies it becomes increasingly important to safeguard the function of electrical devices and systems in their interactive relationship so that operation can be free of interference. This is also the clear objective of the EMC law.
PAGE 2
Filter D-SUB C o n n e c t o r s One of the standard filters offered by CONEC is the so-called “C filter”. Depending on the problem situations, other possible variations can be employed; a two-stage LC filter and a three stage PI filter (C-L-C) are also available in various connector configurations within the standard product line. CONEC filter connectors are an effective way to guard against electromagnetic interference (EMI RFI).
PAGE 3
Filt e r D - S U B C o n n ectors Mating conditions Float mount tolerance guide Rigid mount tolerance guide Rigid mount vertical to tolerance guide Panel cut-out Front panel mounting Rear panel mounting Shell size 9 15 25 37 50 3| 2 15 26 44 62 78 A ± 0,13 B ± 0,13 C ± 0,13 D ± 0,13 E ± 0,13 20.50 28.80 42.50 59.10 56.30 22.20 30.50 44.30 60.70 58.30 25.00 33.30 47.04 63.50 61.10 11.40 11.40 11.40 11.40 14.10 13.00 13.00 13.00 13.00 15.
PAGE 4
Filter D-SUB C o n n e c t o r s Part Number Creator 2 4 1 A 1011 O X Product Line Design 1 = Plug connector, standard DWV 2 = Socket connector, standard DWV 5 = Plug connector, high DWV 6 = Socket connector, high DWV 7* = Plug connector, ultra high DWV 8* = Socket connector, ultra high DWV *on request Quality class for contacts A = Quality class 3 50 mating cycles B = Quality class 2 200 mating cycles C = Quality class 1 500 mating cycles Serial number Design OX = Standard design Filter connectors for h
PAGE 5
Filt e r D - S U B C o n n ectors Technical Data Materials Filter D-SUB Standard 9, 15, 25, 37 and 50 position Filter D-SUB High Density 15, 25, 44, 62 and 78 position Insulator Polyester GF UL94 V-0 Contacts CU alloy Contact plating Gold plated over nickel, solder area tin plated Shell Steel tin plated brass tin plated Mechanical and electrical characteristics Dielectric with standing voltage • Standard • Standard • High DWV • Ultra high DWV • Ultra high DWV 424 VDC 300 VDC (for 70
PAGE 6
Filter D-SUB C o n n e c t o r s Insertion loss C-Filter with planar filter technology C-Filter with chip technology LC-Filter with planar filter technology 3| 5
PAGE 7
Filt e r D - S U B C o n n ectors Insertion loss π-Filter with planar filter technology Solder Profile Connector Type Preheating Duration max. Solder bath Temperature max. Terminal Immersion Time Filter D-SUB 100°C 30s 260°C 5s Combo D-SUB Filter 120°C 120s 260°C 5s Filter D-SUB Water Resistant 100°C 30s 240°C 5s Combo D-SUB Water Resistant 120°C 120s 240°C 5s D-SUB Water Resistant 120°C 120s 240°C 5s D-SUB Solid Body Type Water Resistant 150°C 180s 265°C 8s RJ45 Mod.
PAGE 8
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Solder pin, straight – Plug and Socket connector 9 pos. 37 pos. 15 pos. 50 pos. 25 pos.
PAGE 9
Filt e r D - S U B C o n n ectors PCB layout, D-SUB Standard Solder pin, angled, .318" 7.19 mm – Socket connector 9 pos. 37 pos. 15 pos. 25 pos. PCB layout Kat1kGEA (View: component side) 3| 8 50 pos.
PAGE 10
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Solder pin, angled, .318“ 7.19 mm – Plug connector 9 pos. 37 pos. 15 pos. 50 pos. 25 pos.
PAGE 11
Filt e r D - S U B C o n n ectors PCB layout, D-SUB Standard Solder pin, angled, .370“ 9.4 mm – Socket connector 9 pos. 37 pos. 15 pos. 50 pos. 25 pos.
PAGE 12
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Solder pin, angled, .370“ 9.4 mm – Plug connector 9 pos. 37 pos. 15 pos. 50 pos. 25 pos.
PAGE 13
Filt e r D - S U B C o n n ectors PCB layout, D-SUB Standard Solder pin, angled, .590“ 14.19 mm – Socket connector 9 pos. 15 pos. PCB layout Kat1kGIA (View: component side) 3| 12 25 pos. 37 pos.
PAGE 14
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Solder pin, angled, .590“ 14.19 mm – Plug connector 9 pos. 15 pos. 25 pos. 37 pos.
PAGE 15
Filt e r D - S U B C o n n ectors PCB layout, D-SUB Standard Solder pin, angled, .590“ 14.19 mm – Short metal bracket – Socket connector 9 pos. 25 pos. 15 pos. 37 pos.
PAGE 16
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Solder pin, angled, .590“ 14.19 mm – Short metal bracket – Plug connector 9 pos. 25 pos. 15 pos. 37 pos.
PAGE 17
Filt e r D - S U B C o n n ectors PCB layout, D-SUB Standard Dual port style – Socket connector bottom 2x9 pos. 2x15 pos. PCB layout Kat1iU6A (View: component side) 3| 16 2x25 pos. 2x37 pos.
PAGE 18
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB Standard Dual port style – Plug connector bottom 2x9 pos. 2x15 pos. 2x25 pos. 2x37 pos.
PAGE 19
Filt e r D - S U B C o n n ectors PCB layout, D-SUB High Density Solder pin, straight – Socket connector 15 pos. 62 pos. 26 pos. 78 pos. 44 pos.
PAGE 20
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB High Density Solder pin, straight – Plug connector 15 pos. 62 pos. 26 pos. 78 pos. 44 pos.
PAGE 21
Filt e r D - S U B C o n n ectors PCB layout, D-SUB High Density Solder pin, angled .350" 7.98 mm – Socket connector 15 pos. 62 pos. 26 pos. 78 pos. 44 pos.
PAGE 22
Filter D-SUB C o n n e c t o r s PCB layout, D-SUB High Density Solder pin, angled .350“ 7.98 mm – Plug connector 15 pos. 62 pos. 26 pos. 78 pos. 44 pos.
PAGE 23
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 26 Description Suitable for wire size AWG 26 Mounting styles: - with through-hole, Ø .118”/3 mm - with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.
PAGE 24
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 26 Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 25
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 20 Description Suitable for wire size AWG 20 Mounting styles: - with through-hole, Ø .118”/3 mm - with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.
PAGE 26
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 20 Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 27
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Description Mounting styles: - with through-hole, Ø .118”/3 mm - with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.25 C No. of pos. A -0.76 B +0.25 C 09 31.
PAGE 28
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 29
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Description Mounting styles: - with 4-40 UNC or M3 threaded rear spacer - with 4-40 UNC or M3 front and threaded rear spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.25 C No. of pos. A -0.
PAGE 30
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 31
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Description Mounting styles: - with 4-40 UNC or M3 threaded rear spacer with PCB clip - with 4-40 UNC or M3 front and threaded rear spacer with PCB clip Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.
PAGE 32
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 33
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .318" 7.19 mm – Precision machined contacts – Metal bracket Description Mounting styles: - with mounting bracket and 4-40 UNC threaded insert - with mounting bracket, PCB clip and 4-40 UNC threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 34
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .318“ 7.19 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos. Mounting style 4-40 UNC 09 15 25 37 09 15 25 37 Threaded insert Threaded insert Threaded insert Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert No. of pos.
PAGE 35
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .318“ 7.19 mm – Stamped contacts Description Mounting style: - with mounting bracket, PCB clip and 4-40 UNC threaded insert Quality class 1 (other quality classes on request) Shell: Steel tin plated RoHS compliant Socket connector Plug connector No. of pos. A ±0.10 B -0.25 C No. of pos. A ±0.10 B +0.25 C 09 30.81 16.46 25.00 + 0.12 - 0.13 09 30.81 16.79 25.00 + 0.12 - 0.13 15 39.14 24.79 33.
PAGE 36
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .318“ 7.19 mm – Stamped contacts Order data Capacitance 370 pF Plug connector Socket connector No. of pos. Mounting style 4-40 UNC 09 15 25 37 PCB clip PCB clip PCB clip PCB clip Threaded insert Threaded insert Threaded insert Threaded insert No. of pos.
PAGE 37
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Plastic bracket Description Mounting styles: - Mounting bracket, grounding strap with through-hole Ø .118" 3.0 mm - Mounting bracket, grounding strap with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 38
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Plastic bracket Order data Capacitance 370 pF Socket connector Plug connector No. of pos.
PAGE 39
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Plastic bracket Description Mounting styles: - Mounting bracket with PCB clip and 4-40 UNC or M3 threaded insert - Mounting bracket with PCB clip and through-hole Ø .118“ 3.0 mm Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 40
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Plastic bracket Order data Capacitance 370 pF Socket connector Plug connector No. of pos.
PAGE 41
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Metal bracket Description Mounting styles: - Mounting bracket with PCB clip and 4-40 UNC or M3 threaded insert - Mounting bracket with PCB clip and 4-40 UNC or M3 front spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 42
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Socket connector Plug connector No. of pos.
PAGE 43
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .590“ 14.19 mm – Precision machined contacts – Metal bracket Description Mounting styles: - with mounting bracket and 4-40 UNC threaded insert - with mounting bracket, PCB clip and 4-40 UNC threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 44
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .590“ 14.19 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos. Mounting style 4-40 UNC 09 15 25 37 09 15 25 37 Threaded insert Threaded insert Threaded insert Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert No. of pos.
PAGE 45
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard Solder pin – Angled – .590“ 14.19 mm – Precision machined contacts – Short metal bracket Description Mounting styles: - Mounting bracket, 4-40 UNC threaded insert - Mounting bracket, PCB clip and 4-40 UNC threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No.
PAGE 46
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard Solder pin – Angled – .590“ 14.19 mm – Precision machined contacts – Short metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos. Mounting style 4-40 UNC 09 15 25 37 09 15 25 37 Threaded insert Threaded insert Threaded insert Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert PCB clip Threaded insert No. of pos.
PAGE 47
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard – Dual port Solder pin – Angled – Precision machined contacts – .625“ 15.88 mm connector spacing Description Variations: plug – plug; socket – socket; plug – socket Mounting styles: - with mounting bracket and 4-40 UNC threaded insert - with mounting bracket and 4-40 UNC front spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.
PAGE 48
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard – Dual port Solder pin – Angled – Precision machined contacts – .625“ 15.88 mm connector spacing Order data Capacitance 370 pF Version with 4-40 UNC Threaded insert Version with 4-40 UNC Front spacer No. of pos. Design No. of pos.
PAGE 49
Filt e r D - S U B C o n n ectors C-Filter D-SUB Standard – Dual port Solder pin – Angled – Precision machined contacts – .780“ 19.05 mm connector spacing Description Variations: plug – plug; socket – socket; plug – socket Mounting styles: - with mounting bracket and 4-40 UNC threaded insert - with mounting bracket and 4-40 UNC front spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.
PAGE 50
Filter D-SUB C o n n e c t o r s C-Filter D-SUB Standard – Dual por Solder pin – Angled – Precision machined contacts – .780“ 19.05 mm connector spacing Order data Capacitance 370 pF Version with 4-40 UNC Threaded insert Version with 4-40 UNC Front spacer No. of pos. Design No. of pos.
PAGE 51
Filt e r D - S U B C o n n ectors LC-Filter D-SUB Standard Solder pin – Angled – .283“ 7.19 mm – Precision machined contacts – Metal bracket Description Mounting styles: - Mounting bracket with 4-40 UNC threaded insert - Mounting bracket with PCB clip and 4-40 UNC threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No.
PAGE 52
Filter D-SUB C o n n e c t o r s LC-Filter D-SUB Standard Solder pin – Angled – .283“ 7.19 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 53
Filt e r D - S U B C o n n ectors LC-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Metal bracket Description Mounting styles: - Mounting bracket with 4-40 UNC or M3 threaded insert - Mounting bracket with PCB clip and 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 54
Filter D-SUB C o n n e c t o r s LC-Filter D-SUB Standard Solder pin – Angled – .370“ 9.4 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 55
Filt e r D - S U B C o n n ectors π-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 20 Description Suitable for wire size AWG 20 Mounting styles: - with through-hole, Ø .118”/3 mm - with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.
PAGE 56
Filter D-SUB C o n n e c t o r s π-Filter D-SUB Standard Solder cup – Precision machined contacts – For wire size AWG 20 Order data Capacitance 2 x 370 pF Socket connector No. of pos.
PAGE 57
Filt e r D - S U B C o n n ectors π-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Description Mounting style: with 4-40 UNC or M3 threaded rear spacer with PCB clip Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.25 C No. of pos. A -0.76 B +0.25 C 09 31.19 16.46 25.
PAGE 58
Filter D-SUB C o n n e c t o r s π-Filter D-SUB Standard Solder pin – Straight – Precision machined contacts Order data Capacitance 2 x 370 pF Plug connector Socket connector No. of pos.
PAGE 59
Filt e r D - S U B C o n n ectors π-Filter D-SUB Standard Solder pin – Angled – .590" 14.19 mm – Precision machined contacts – Metal bracket Description Mounting styles: - Mounting bracket with 4-40 UNC threaded insert - Mounting bracket with PCB clip and 4-40 UNC threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No.
PAGE 60
Filter D-SUB C o n n e c t o r s π-Filter D-SUB Standard Solder pin – Angled – .590“ 14.19 mm – Precision machined contacts – Metal bracket Order data Capacitance 2 x 370 pF Socket connector No. of pos.
PAGE 61
Filt e r D - S U B C o n n ectors C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Description Mounting styles: - with through-hole, Ø .118”/3 mm - with 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.25 C No. of pos. A -0.76 B +0.
PAGE 62
Filter D-SUB C o n n e c t o r s C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Socket connector No. of pos.
PAGE 63
Filt e r D - S U B C o n n ectors C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Description Mounting styles: - with 4-40 UNC or M3 threaded rear spacer - with 4-40 UNC or M3 front and threaded rear spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.76 B -0.25 C No. of pos.
PAGE 64
Filter D-SUB C o n n e c t o r s C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 65
Filt e r D - S U B C o n n ectors C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Description Mounting styles: - with 4-40 UNC or M3 threaded rear spacer with PCB clip - with 4-40 UNC or M3 front and threaded rear spacer with PCB clip Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Socket connector Plug connector No. of pos. A -0.
PAGE 66
Filter D-SUB C o n n e c t o r s C-Filter D-SUB High Density Solder pin – Straight – Precision machined contacts Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 67
Filt e r D - S U B C o n n ectors C-Filter D-SUB High Density Solder pin – Angled – .350" 7.98 mm – Precision machined contacts – Plastic bracket Description Mounting styles: - with mounting bracket, grounding strap and 4-40 UNC or M3 threaded insert - with mounting bracket, grounding strap and 4-40 UNC or M3 front spacer Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 68
Filter D-SUB C o n n e c t o r s C-Filter D-SUB High Density Solder pin – Angled – .350“ 7.98 mm – Precision machined contacts – Plastic bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 69
Filt e r D - S U B C o n n ectors C-Filter D-SUB High Density Solder pin – Angled – .350“ 7.98 mm – Precision machined contacts – Metal bracket Description Mounting styles: - with mounting bracket and 4-40 UNC or M3 threaded insert - with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 70
Filter D-SUB C o n n e c t o r s C-Filter D-SUB High Density Solder pin – Angled – .350“ 7.98 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 71
Filt e r D - S U B C o n n ectors LC-Filter D-SUB High Density Solder pin – Angled – .350“ 7.98 mm – Precision machined contacts – Metal bracket Description Mounting styles: - with mounting bracket and 4-40 UNC or M3 threaded insert - with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert 44 and 62 pos. version implemented with ferrite pearls Quality class 3 (also available in quality class 1) Shell: Steel tin plated (brass tin plated on request) RoHS compliant – CSA listed, File No.
PAGE 72
Filter D-SUB C o n n e c t o r s LC-Filter D-SUB High Density Solder pin – Angled – .350“ 7.98 mm – Precision machined contacts – Metal bracket Order data Capacitance 370 pF Plug connector Socket connector No. of pos.
PAGE 73
Filt e r D - S U B C o n n ectors Filter D-SUB – Accessories Ferrite for Standard and High Density D-SUB Description Ferrite black for use with D-SUB Connectors RoHS compliant Ferrite for Standard D-SUB Ferrite for High Density angled D-SUB No. of pos. A ±0.5 B ±0.5 C ±0.10 No. of pos. A ±0.5 B ±0.5 C ±0.10 09 14.50 7.6 2.75 15 14.0 6.9 2.0 0.91 15 22.65 7.6 2.74 26 22.6 9.5 2.2 3.26 25 36.40 7.6 2.70 37 53.08 7.6 2.80 D ±0.
PAGE 74
Filter D-SUB C o n n e c t o r s Filter D-SUB – Accessories EMI RFI shielding frames Description Material: Stainless steel For improved ground contact Suitable for assembly to the mating side RoHS compliant Product drawing Shell size A B C D E F G 1 35.80 19.80 24.90 3.20 5.60 11.20 17.50 2 44.20 28.20 33.30 3.20 5.60 11.20 17.50 3 57.90 41.90 47.00 3.20 5.60 11.20 17.50 4 74.40 58.20 63.50 3.20 5.60 11.20 17.50 5 72.10 53.60 61.20 6.10 7.10 13.90 20.