Accessories Instruction Manual

ManualsBrandsNorthern Connectors ManualsHardwareConec D-Sub Hoods &

D - S U B H o o d s a n d A c c e s s o r i e s

Section 10

D-SUB Hoods and Accessories

The diversity of different applications and market requirements makes

it necessary to offer a comprehensive line of hoods and backshells. The

CONEC product line includes shielded hoods made of metal, plastic,

Metallized plastic and plastic with metal inserts.

Connectors with high current or coaxial contacts require special hoods

with adapted interiors. In these cases the height of the housing is

particularly important to assure faultless seating of the contacts. The

cable should exit from the hood or backshell without introducing any

strain on the contacts.

Summary of content (54 pages)

PAGE 1
D-S U B H o o d s a n d Accessories Section 10 D-SUB Hoods and Accessories The diversity of different applications and market requirements makes it necessary to offer a comprehensive line of hoods and backshells. The CONEC product line includes shielded hoods made of metal, plastic, Metallized plastic and plastic with metal inserts. Connectors with high current or coaxial contacts require special hoods with adapted interiors.
PAGE 2
D-SUB Hoods and A c c e s s o r i e s A special developed hood with an IP67 rating is available to provide optimal water resistance for D-SUB Connectors. The input/output connector product line is supplemented by a wide array of accessories. The various caps, hardware and latches are available for use with these D-subminiature connectors, whether standard, high density, combination or filter designs are selected.
PAGE 3
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Straight cable entry – 9-50 pos. Description Zinc die-cast hood, EMI RFI shielding Cable sleeve Fastening: - short screws 4-40 UNC or M3 thread - jack screws 4-40 UNC or M3 thread Housing nickel plated Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing No. of pos. A B C D E ØF 09 31.70 25.00 30.00 32.70 15.00 5.00 15 40.00 33.30 32.00 34.70 15.00 5.
PAGE 4
D-SUB Hoods and A c c e s s o r i e s D-SUB Metal Hood Side cable entry – 9-50 pos. Description Zinc die-cast hood, EMI RFI shielding Cable sleeve Fastening: - short screws 4-40 UNC or M3 thread Housing nickel plated Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing No. of pos. A B C D E ØF 09 31.80 25.00 39.50 42.40 15.40 5.00 5.00 15 40.30 33.30 41.00 43.50 15.40 25 54.00 47.00 45.00 47.70 15.40 7.
PAGE 5
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Variable cable entries – 9-50 pos. – Without jack screws Description Zinc die-cast hood, EMI RFI shielding Two designs: - Type 1: 1.575" 40 mm height - Type 2: 2.165" 55 mm height Delivery includes: Hood with covers, blanking plugs, screws for assembly Cable clamp must be ordered separately Crimp fitting and crimp tool please contact factory Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 6
D-SUB Hoods and A c c e s s o r i e s D-SUB Metal Hood Variable cable entries – 9-50 pos. – Jack screws Description Zinc die-cast hood, EMI RFI shielding Two designs: - Type 1: 1.575“ 40 mm height - Type 2: 2.
PAGE 7
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Variable cable entries – 9-50 pos. – Slide lock Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Zinc die-cast hood, EMI RFI shielding Design: 9 pos. = two sided cable entries, 15-50 pos.
PAGE 8
D-SUB Hoods and A c c e s s o r i e s D-SUB Metal Hood Variable cable entries – 9-50 pos. – Without jack screws Description Zinc die-cast hood, EMI RFI shielding Design: 9 pos. = two side cable entries, 15-50 pos. = three cable entries Internal ground Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos. 15-50 pos. D D D D D Cable clamp No. of pos. A B C D 09 31.00 25.00 14.80 12 x 9.0 15 39.00 33.30 14.
PAGE 9
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Variable cable entries – 9-25 pos. – Jack screws Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Zinc die-cast hood, EMI RFI shielding Designs: 9-15 pos. = one straight cable entry, 25 pos. = three cable entries Internal ground 4-40 UNC jack screw M3 thread design for jack screws available on request Bulk or single packaged units Cable clamps must be ordered separately Product drawing 9 pos. 15 pos.
PAGE 10
D-SUB Hoods and A c c e s s o r i e s D-SUB Metal Hood Side cable entry – 9-25 pos. – Jack screws Description Zinc die-cast hood, EMI RFI shielding Internal ground Fastening: jack screws 4-40 UNC or M3 thread Bulk or single packaged units Cable clamps must be ordered separately RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing C No. of pos. A B C 09 31.00 25.00 10 x 9.2 15 39.00 33.30 12 x 9.2 25 53.00 47.00 12 x 9.
PAGE 11
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Straight cable entry – 9-50 pos. – With jack screws Description Zinc die-cast hood, EMI RFI shielding Simple assembly Fastening: - Short screw Thread 4-40 UNC - Jack screw Thread 4-40 UNC Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing short screw No. of pos. A B C D E F G 09 19.80 25.00 31.00 47.00 15.60 – 8.50 10.00 15 27.90 33.30 40.20 48.30 16.
PAGE 12
D-SUB Hoods and A c c e s s o r i e s D-SUB Metal Hood Straight cable entry – 9-37 pos. – Jack screws Description Zinc die-cast hood, EMI RFI shielding Plastic strain relief Fastening: jack screws 4-40 UNC or M3 thread Housing nickel plated Attentuation factor: > 40dB between 30 Mhz and 2 GHz Crimp fitting and crimp tool please contact factory Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing No. of pos. A B C 09 31.00 25.
PAGE 13
D-S U B H o o d s a n d Accessories D-SUB Metal Hood Side cable entry – 9-37 pos. – Jack screws Description Zinc die-cast hood, EMI RFI shielding Plastic strain relief Fastening: jack screws 4-40 UNC or M3 thread Housing nickel plated Attentuation factor: > 40dB between 30 Mhz and 2 GHz Crimp fitting and crimp tool please contact factory Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos. 15-37 pos. No. of pos.
PAGE 14
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Side cable entry – 9-50 pos. – With and without internal shielding Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 15
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight cable entry – 9-50 pos. – With jack screws Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Two-part plastic hood Integrated cable clamping Material: - Plastic hood grey black: Polyamide + Glas filled, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: - 4-40 UNC jack screw - M3 jack screw Bulk or single packaged units Product drawing No. of pos. A B C D E ØF 09 34.00 25.
PAGE 16
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Straight cable entry – 9-50 pos. – Cable-to-cable connection Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Two-part plastic hood Integrated cable clamping Material: - Plastic hood grey black: Polyamide + Glas filled, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: - 4-40 UNC jack screw - M3 jack screw Bulk or single packaged units Product drawing No. of pos. A B C D E ØF 09 34.
PAGE 17
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight cable entry – 9-50 pos. Description Suitable for Combination D-SUB Connectors Large internal space for crimp, high power and coaxial contacts Material: - Plastic hood black: Polyester, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: - 4-40 UNC jack screw or M3 - 4-40 UNC short screw or M3 Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 18
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Side cable entry – 9-50 pos. Description Suitable for Combination D-SUB Connectors Large internal space for crimp, high power and coaxial contacts Material: - Plastic hood black: Polyester, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: 4-40 UNC or M3 short screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9-25 pos. 37-50 pos No. of pos.
PAGE 19
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Single or dual cable entry – 9-50 pos. Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos. Integrated cable clamping Design: 9 pos. = one straight cable entry, 15-50 pos.
PAGE 20
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Straight or side cable entry – 9-37 pos. – Low profile Description Space-saving, side-by-side mounting Material: - Plastic hood black: ABS, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: - 4-40 UNC jack screw - 4-40 UNC short screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Straight cable entry 9-37 pos. 60° cable entry 9-37 pos. No. of pos.
PAGE 21
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight or side cable entry – 9-50 pos. – Jack screws or slide lock mounting Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 22
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Side cable entry – 9-50 pos. – Jack screws or short screws Description Material: - Plastic hood black: ABS, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: - 4-40 UNC short screws - 4-40 UNC jack screws Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing with short screw with jack screws No. of pos. A B C D ØE 09 31.50 25.00 37.00 15.20 8.
PAGE 23
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight cable entry – 9-37 pos. – Jack screws or short screws Description Material: - Plastic hood grey: ABS, UL 94 V-2 - Plastic hood metallized: ABS, UL 94 V-2 Fastening: - 4-40 UNC short screw - 4-40 UNC jack screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos. with short screw 15-50 pos. with jack screws No. of pos. A B C D E F 09 20.50 25.00 31.
PAGE 24
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Straight or side cable entry – 9-50 pos. Description Material: Plastic hood black: Polyamide 6.6 + Glas filled, UL 94 V-0 Fastening: - 4-40 UNC short screw - 4-40 UNC jack screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Short screw Jack screw No. of pos. A B C D ØE 09 33.00 25.00 45.50 17.00 7.50 15 41.00 33.30 45.50 17.00 8.50 25 55.00 47.
PAGE 25
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight cable entry – 9, 25 and 37 pos. – Flat mounting style Description Strain relief is achieved by using a cable tie Material: Plastic hood black: Polyamide 6.6 + Glas filled, UL 94 V-0 Fastening: 4-40 UNC short screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing No. of pos. A B C 09 31.20 25.00 43.60 ØD 8.00 25 53.50 47.00 43.60 10.30 37 69.70 63.
PAGE 26
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood 50 pos. with large cable opening – 25 pos. – Snap locking hood Description Large cable opening 50 pos. version - Plastic hood black: Polyamide 6.6 + Glas filled, UL 94 V-0 - Fastening: 4-40 UNC short screws 25 pos.
PAGE 27
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Variable cable entries – 9-50 pos. – Without jack screws Description Entries not in use are blanked off with blanking plugs Design: - 9 pos.: two cable entries - 15-50 pos.: two side and one straight cable entry Material: - Plastic hood black: ABS, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos.
PAGE 28
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Straight or side cable entry – 9-50 pos. – Single piece Design Description Cable strain relief, set screws Material: Plastic hood black: Polyamide 6.6, UL 94 V-0 Fastening: with connector mounting screws Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Straight cable entry Side cable entry No. of pos. A B C D E ØF G 09 30.90 25.00 25.40 12.70 14.30 7.
PAGE 29
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Straight or side cable entry – Hinged version – 9 and 25 pos. Description Strain relief is achieved by plastic inserts Material: Plastic hood black: Polypropylene, UL 94 V-0 Fastening: without jack screws Crimp fitting and crimp tool please contact factory Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9 pos. 25 pos. Order data D-SUB Plastic hood No. of pos.
PAGE 30
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood Side cable entry – Low profile – 15 pos. Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 31
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood For flat cable – Snap locking – 25 and 37 pos. Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Hood for IDC D-SUB Connectors Quick assembly snap locking feature Integrated strain relief Material: - plastic hood grey: ABS, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: 4-40 UNC short screws Bulk or single packaged units Product drawing No. of pos. A B C 25 53.20 47.00 35.
PAGE 32
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood For flat cable version and round cable version – 9 and 50 pos. Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 33
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood Design for power 2W2 Combination D-SUB Connectors – Wire size AWG 8…20 Description Hood for 2W2 Combination D-SUB Connector Design: round cable entries with strain relief for wire size AWG 8…20 Material: Plastic hood grey: PA 6.6 Glas filled, UL 94 V-0 Fastening: 4-40 UNC jack screws Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 34
D-SUB Hoods and A c c e s s o r i e s D-SUB Plastic Hood 3W3 Design for power 3W3 Combination D-SUB Connectors – Wire size AWG 6…20 Description Hood for 3W3 Combination D-SUB Connector Design: round cable entries with strain relief for wire size AWG 6…20 Material: Plastic hood grey: PA 6.6 Glas filled, UL 94 V-0 Fastening: 4-40 UNC jack screw Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing AWG Outer diameter cable 6 8.
PAGE 35
D-S U B H o o d s a n d Accessories D-SUB MicroTCA Metal Hood Side cable entry – Slim design Description Cable hood for 7W2 MicroTCA Connector Suitable for other D-SUB Connectors Slim design for use on dual port interfaces Solid strain relief Material: zinc die-cast Fastening 4-40 UNC screws Crimp fitting and crimp tool please contact factory Bulk or single packaged units RoHS compliant Product drawing Order data D-SUB MicroTCA Hood 7W2 Type Design Part Number 7W2 Metal hood 16-000010 For single pa
PAGE 36
D-SUB Hoods and A c c e s s o r i e s D-SUB MicroTCA Hood set Plastic hood with crimp connector body – Straight cable entry Description Hood and crimp body (7W2 type) (other crimp bodies for shell size 2 on request) Small design style for use on dual port interfaces Crimp contact refer at page 9|15 Design - Plastic hood black with integrated strain relief - 7W2 Crimp body without contacts - jack screw Allen Key or Phillips, 4-40 UNC - short screw Allen Key or Phillips, 4-40 UNC Bulk or single packaged unit
PAGE 37
D-S U B H o o d s a n d Accessories D-SUB Plastic Hood IP67 Straight cable entry – 9-50 pos.
PAGE 38
D-SUB Hoods and A c c e s s o r i e s D-SUB Adapter Hood Plastic design – 9-25 pos. Description Adapter hood with large internal space inside for custom applications Material: - Plastic hood grey: ABS, UL 94 V-0 - Plastic hood metallized: ABS, UL 94 V-0 Fastening: 4-40 UNC short screws Bulk or single packaged units RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing 9-25 pos. No. of pos. A B C 09 09 34.00 25.00 53.00 15 15 41.30 33.30 52.
PAGE 39
D-S U B H o o d s a n d Accessories D-SUB Protection cap Plastic design – 9-50 pos. – For use with shell size 1-5 Description Dust cap protecting connector mounting area Material: TPE; UL94 V-0 Color: Black Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A B C D 09 22.90 16.20 22.50 16.90 15 31.40 24.70 30.65 25.05 25 44.70 38.00 44.40 38.80 37 61.20 54.50 60.75 55.15 50 58.80 52.10 58.15 52.
PAGE 40
D-SUB Hoods and A c c e s s o r i e s D-SUB Protection cap Plastic design – Shielded – 9-50 pos. – For use with shell size 1-5 Description Shielded cap protecting against EMI/RFI as well as ESD Material: ABS, UL94 V-0; metallized Temperature range: -35°C… +85°C Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A B C D 09 22.90 16.20 22.50 16.90 15 31.40 24.70 30.65 25.05 25 44.70 38.00 44.40 38.80 37 61.20 54.50 60.75 55.
PAGE 41
D-S U B H o o d s a n d Accessories D-SUB Shielded cap Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 Description Shielded cap protecting against EMI RFI Material: Steel tin plated Mounting style: with Through-hole Ø .118" 3.00 mm Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1-0,25 B2+0,25 C 09 31.19 16.46 16.79 25.00 D-0,3 6.12 15 39.52 24.79 25.12 33.30 6.12 25 53.42 38.50 38.84 47.04 5.
PAGE 42
D-SUB Hoods and A c c e s s o r i e s D-SUB Shielded cap Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 – Fastening screws Description Shielded cap protecting against EMI RFI Material: Steel tin plated Mounting style: with 4-40 UNC screw and clip Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1-0,25 B2+0,25 C 09 31.19 16.46 16.79 25.00 D-0,3 6.12 15 39.52 24.79 25.12 33.30 6.12 25 53.42 38.50 38.
PAGE 43
D-S U B H o o d s a n d Accessories D-SUB Shielded cap Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 – Jack screws Description Shielded cap protecting against EMI RFI Material: Steel tin plated Mounting style: - with jack screw M3 or - with jack screw 4-40 UNC Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) Order data No. of pos. A-0,76 B1-0,25 B2+0,25 C 09 31.19 16.46 16.79 25.00 6.12 15 39.52 24.79 25.12 33.30 6.
PAGE 44
D-SUB Hoods and A c c e s s o r i e s D-SUB Shielded cap Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 – Lanyard Description Shielded cap protecting against EMI RFI Material: - Shell: Steel tin plated - Lanyard: Stainless steel Mounting style: - with steel screws M3 or - with short screws 4-40 UNC Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1+0,25 B2-0,25 C 09 31.19 16.79 16.46 25.00 D-0,3 6.12 15 39.
PAGE 45
D-S U B H o o d s a n d Accessories D-SUB Shielded cap Metal design – Shielded – Jack screw – Lanyard Description Shielded cap protecting against EMI RFI Material: - Shell: Steel tin plated - Lanyard: Stainless steel - Screw: Steel or stainless steel Mounting style: with M3 or 4-40 UNC Jack screw Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1+0,25 B2-0,25 C 09 31.19 16.79 16.46 25.00 D-0,3 6.12 15 39.52 25.12 24.79 33.
PAGE 46
D-SUB Hoods and A c c e s s o r i e s D-SUB Protection cap – IP67 Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 – Fastening screws Description IP67 Protection cap with gasket EMI RFI protection Material: Brass tin plated Mounting style: with M3 or 4-40 UNC screw and stainless steel clip Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1+0,25 B2-0,25 C 09 31.19 16.46 16.79 25.00 D-0,3 6.12 15 39.52 24.79 25.
PAGE 47
D-S U B H o o d s a n d Accessories D-SUB Protection cap – IP67 Metal design – Shielded – 9-50 pos. – For use with shell size 1-5 – Jack screw Description IP67 Protection cap with gasket EMI RFI protection Material: Brass tin plated Mounting style: with M3 or 4-40 UNC jack screws steel nickel plated Bulk packaged RoHS compliant For socket connector For plug connector 50 pos. = Dim. in (..) No. of pos. A-0,76 B1+0,25 B2-0,25 C 09 31.19 16.46 16.79 25.00 D-0,3 6.12 15 39.52 24.79 25.12 33.
PAGE 48
D-SUB Hoods and A c c e s s o r i e s D-SUB Shell – IP67 Accessories Protection cap and sealing – 9-50 pos. – Gasket refer to page 10|36 Description Protection cap for use with IP67 hoods Outside sealing as accessory for IP67 D-SUB Connector for front panel mounting Material: TPE Bulk packaged RoHS compliant Product drawing Protection cap Outside sealing No. of pos. A B C No. of pos. A -0.2 B +0.2 C -0.2 D +0.2 09 44.56 12.60 25.60 09 38.36 33.96 20.00 15.60 E +0.5 9.90 15 52.
PAGE 49
D-S U B H o o d s a n d Accessories D-SUB Hardware accessories Hex bolt-spacer – Screw locking Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Material: Steel nickel plated Delivery includes: - Single hex bolts - Set composed of each with - 2 hex bolts - 2 grommets - 2 spring rings - 2 nuts Bulk packaged Product drawing Single hex bolt Screw locking set Single hex bolt set Hex bolt nut .228" 5.
PAGE 50
D-SUB Hoods and A c c e s s o r i e s D-SUB Hardware accessories Screw locking with clamp – 9-37, 50 pos. – Steel or stainless steel Description Two types available - Type 1: Steel - Type 2: Stainless steel Delivery includes: - Set consists of - 2 clamps - 2 screws Bulk packaged RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Type 2: Stainless steel Type 1: Steel 50 pos. = Dim. in (..) Order data Screw coupling with clamps type 1 - Steel No.
PAGE 51
D-S U B H o o d s a n d Accessories D-SUB Hardware accessories Spring locking Description RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Steel Delivery includes: - Set consists of - 2 spring clips - 2 wire clamp holders - 2 clamps - 4 M3 screws - 4 M3 nuts Bulk packaged Product drawing View for assembly Order data Spring locking No. of pos.
PAGE 52
D-SUB Hoods and A c c e s s o r i e s D-SUB Hardware accessories Slide lock with holding bolt – Mounting for 9-50 pos. Description Slide lock set in two designs: - Type 3: 1 frame, 2 screws 4-40 UNC, 2 grommets, 2 spring rings, 2 4-40 UNC nuts - Type 4: 1 frame, 2 4-40 UNC screws, 2 grommets, 2 spring rings, 2 4-40 UNC nuts Holding bolt set consists of 2 hex bolts, 2 grommets, 2 spring rings, 2 nuts Bulk packaged RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.
PAGE 53
D-S U B H o o d s a n d Accessories D-SUB Hardware accessories Snap locking for hoods with straight and side cable entry – 9-37, 50 pos. Description Steel design Delivery includes: - Set consists of - 2 locking levers - 2 self threading screws - 2 snap-fits - 2 M3 screws - 2 spring rings - 2 M3 nuts Steel, nickel plated Bulk packaged RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing For straight Cable entry For sided Cable entry 50 pos.
PAGE 54
D-SUB Hoods and A c c e s s o r i e s D-SUB Hardware accessories Blind mating – Plug-in system – 9-50 pos. Description Mounting for mating applications consist of frame, float mount and guide pins Material: Steel nickel plated Frame is factory assembled For additional versions please contact factory RoHS compliant – CSA listed, File No.: LR 115000-1 – UL listed, File No.: E202784 Product drawing Guide post Frame View for assembly No. of pos. A ± 0.2 B ± 0.2 C ± 0.2 D ± 0.3 E ± 0.2 F ± 0.