Instruction Manual

06
.
112
Han
Modular
Han
®
Pneumatic module
Features
• For the transmission of clean and dry compressed
• Female contacts with / without shut o
• Removal of tubes from pre-assembled pneumatic
contacts is possible
Shut o principle:
In the disconnected position the spring integrated in the female
contact is active, thus the O-ring of the valve seals the opening
of the air-way. During the mating process, when the dened
depth of insertion is reached the male contact presses on the
valve head and moves it backwards against the spring tension,
so that the air-way opens.
Using of guiding pins in connection with pneumatic modules is
imperative.
In addition to this guiding pins guarantee a coding, if pneumatic
modules are used exclusively.
Technical characteristics
Approvals ,
Inserts *
Number of contacts 3
Colour blue
Material polycarbonate
Limiting temperatures -40 °C ... +80 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material delrin acetal
Colour black
Tube termination
- Internal diameter (ID) 1.6 mm / 1/16“
3.0 mm
4.0 mm / 1/8“
Working pressure up to 8 bar / 116 psi
Sealing
Material Buna-N
Shut o valve
Material Polypropylen
* Assemble contacts before module is xed into the frame