Product Manual

200789
MOUNTING WITH SCREWS
Place the box in the bed of the truck, positioning it in the desired mounting area.
Align the holes in the front and rear feet over the highest part of the ridges in the truck bed/liner
(if applicable). The box must be securely anchored through the bed liner into the truck bed (Fig. 1).
Secure the box to the truck bed with 3/8” self-tapping screws through the holes provided in each foot (Fig. 2).
USING LESS THAN TWO SCREWS ON EACH FOOT WILL VOID THE TOOL BOX WARRANTY.
Ensure the box is closed and locked before operating the vehicle.
1.
2.
3.
4.
NOTE: If your truck has a bed liner, use
these instructions as a guide only.
Due to the many differences in bed liner
thickness and fit, longer fasteners are
highly recommended.
You will need to ensure that your new
truck box is mounted securely to the
truck, not the bed liner.
3/8” Self-tapping screws
3/8” Self-tapping screws
Rear View
Rear View
Fig. 2
Fig. 1
Fig. 1
Fig. 2
For Customer Service or Warranty Information: 1-800-222-5831
Distributed by:
Northern Tool & Equipment Company, Inc.
Burnsville, Minnesota 55306
www.northerntool.com
Read these instructions to familiarize yourself with assembly and installation. This tool box is designed for certain applications only.
Northern Tool & Equipment is not responsible for issues arising from modication or improper use of this product such as an applica-
tion for which it was not designed. We strongly recommend that this product not be modied and/or used for any application other
than that for which it was designed.
Any leaking caused by unsealed holes in the box bottom
will void the warranty.
This tool box must be securely mounted to prevent
movement or shifting.