Pneumatic Roller Seat with Storage Tray Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This seat is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Pneumatic Roller Seat with Storage Tray has one-hand pneumatic height adjustment which makes it easy to get the right position. Extra padded seat for comfort and the 5 swivel casters for easy maneuvering and increased stability. 5 section storage tray for tools and parts. Technical Specifications Property Overall Dimensions Specification 17”x17”x17” Net Weight 18.2 lbs. Seat Material Rated Load Capacity 14” Steel 400 lbs.
Do not overreach. Keep proper footing and balance at all times. ⚠CAUTION SEAT USE AND CARE Do not force the seat. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the seat will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the seat with a damaged part.
Parts Diagram Parts List Part Number 1 2 3 4 5 6 Item Description Seat Air cylinder Base Caster Nut Spring washer Qty.
Assembly Instructions Assembly Steps 1. Slide the painted end of the air cylinder into the hole in the center of the base. 2. Place the seat on top of the unpainted end of the air cylinder. 3. Lock the air cylinder in place by slowing adding your weight to the seat and remaining seated for approximately 10 seconds.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following will be required: item model number, Item Serial Number/Item Lot Date Code, Item Description, and the Replacement Part Reference Number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the NTE product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
