Northstar 8000i 8 Port Network Linker Installation Manual www.northstarnav.
1 Warning and safety information IMPORTANT SAFETY INFORMATION Please read carefully before use This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety measures that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
2 Disclaimer As Northstar is continuously improving this product we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearest Northstar distributor if you require any further assistance. It is the owner’s sole responsibility to install and use the instrument and transducers in a manner that will not cause accidents, personal injury or property damage.
Contents 1 Warning and safety information 2 2 Disclaimer 3 3 Warranty 3 4 Northstar 8000i 8 Port Network Linker 5 5 What comes with your Northstar 8000i 8 Port Network Linker 7 6 Installation 8 7 Maintenance 10 8 Specifications 10 9 Technical support, service and repairs 10
4 Northstar 8000i 8 Port Network Linker The Northstar 8000i 8 Port Network Linker is installed in a Northstar 8000i System to link up to eight network devices. This manual describes how to install the unit, and must be used with the guides in the Northstar 8000i System Installation Manual. 8 Port Network Linker - Front view A Power B Network Connection 8 Waterproof network connections. These can connect to any Northstar 8000i network device.
8 Port Network Linker - Top view 6 A POWER LED The red LED indicated that the unit has power and is turned on B PORT LEDs The LEDs indicate the status of the network port a device is connected to: Yellow indicates that a link is made between the device and the 8 port network linker.
5 What comes with your Northstar 8000i 8 Port Network Linker 8 Port Network Linker NS004721 Large Protective Caps x 8 CN000222-G Mounting Screws x 6 HR000087 Power Cable AS000455-G This Manual MN000616D-G Warranty Northstar 8000i 8 Port Network Linker Installation Manual 7
Registration Card 6 Mounting Template LA000591A-G Installation Read and observe the Warnings and Notices in the Northstar 8000i System Installation Manual. Follow the Installation Guide in the Northstar 8000i System Installation Manual. Find a suitable location for the unit following the Location Guidelines in the Northstar 8000i System Installation Manual.
Use the screws supplied to screw the case to the panel. The unit and all connectors are waterproof. The unit screws to a vertical panel with the connectors facing down. Form the cables into loops below the unit so that any condensation will drip off.
7 Maintenance Follow the Maintenance Guidelines in the Northstar 8000i System Installation Manual. 8 9 Specifications Power supply: 10 V DC to 35 V DC, 3 W maximum. Operating temperature: 5ºF to 131ºF (-15ºC to 55ºC). Environment: The case and cables are waterproof to IPX6. Technical support, service and repairs Northstar products are manufactured and serviced by BNT Marine Electronics. The product is covered by a warranty which is supplied as a separate document.
UNITED STATES EUROPE 30 Sudbury Road, Unit 2, Ocean Quay, Acton, MA 01720, Belvidere Rd, Southampton, United States Ph: +1 978.897.6600 Fax: +1 978.897.7241 sales@bntmarine.com SO14 5QY, England Ph: +44 2380 339922 Fax: +44 2380 330345 northstaruk@northstarnav.com AUSTRALIA NEW ZEALAND PO Box 479, PO Box 68 155, Gladesville, NSW 2111, Australia Ph: +61 2 9879 9000 Fax: +61 2 9879 9001 northstaraus@northstarnav.
www.northstarnav.
