User manual

Northstar 8000i 8 Port Network Linker Installation Manual 9
Use the screws supplied to screw the case to the panel.
The unit and all connectors are waterproof. The unit screws to a vertical panel with
the connectors facing down. Form the cables into loops below the unit so that any
condensation will drip off.
Connect all necessary network cables to the Network Linker and to the other
Network devices (See Northstar 8000i System Installation manual for more
information)
Connect to supplied power cable making sure a 5 Amp fuse is used
A Red Battery Positive
B Black Battery Negative
C Brown Ships Ground
D Fuse Use a 5 Amp fuse or breaker
E Battery
Turn the unit’s power supply and the Northstar 8000i System on. Check that the red
power LED is on. Yellow Link LEDs will be lit of ports connected to Active network
devices
The unit turns on automatically when you turn the unit’s power supply on and the
Northstar 8000i System on - it does not have a separate power switch.