Product Manual

Table Of Contents

Maintenance & Repair

Note: Some general rules of belt tension are:

• The ideal tension is the lowest tension without belt slippage

• Over tightening decreases belt and bearing life.

• Keep belts clean and free of foreign material that may cause

slippage

• Do not apply belt dressing, which can cause damage and early

belt failure.

6) Re-tighten Tension Bracket mounting bolts (3) and Lower fuel pump

mount bolt (1).

7) Replace belt guard.

WARNING:

Do not operate unless belt guard is in place to prevent access to rotating

parts. Clothing or hair can become rapidly entangled in unguarded rotating

parts, resulting in serious injury or death.

NOTE: TO COMMERCIAL USERS:

All mechanical equipment, no matter how well designed, will need maintenance and repairs. A NorthStar pressure

washer is no exception. At times, a NorthStar pressure washer may become inoperable because repairs are required.

FIG 157114-11

TENSION BRACKET

MOUNT BOLTS

FIG A

TENSIONING NUT

FIG C

TENSION BRACKET

LOWER FUEL PUMP

MOUNT BOLT

FUEL PUMP

MOUNT

FIG B

BELT