Product Manual

13
Initial Set-Up
Elevating or lowering your pressure washer
• To reduce risk of injury, it is recommended that
two adults lift the pressure washer.
• Only lift the pressure washer by the bumper and
handle. Do not use the pump or engine as a lifting
point.
Outdoor Use Only
Select a suitable outdoor location:
1. Never run the pressure washer in an enclosed
or partially enclosed location such as a building,
garage, barn, shed, or house. These spaces
can trap poisonous gases. Running a fan or
opening windows will not provide adequate
ventilation to prevent dangerous CO build-up.
2. Only use the pressure washer outdoors and at
least 20 feet from the home, away from
windows, vents and air intakes, to allow proper
ventilation. If you start to feel sick, dizzy, or
weak while using the pressure washer, shut off
the engine and get to fresh air RIGHT AWAY.
3. Place the pressure washer so that the exhaust
fumes will not be directed towards people or
building air intakes.
4. Do not locate and use the pressure washer in
the presence of flammable vapors, dust, gases,
or other potentially combustible materials.
5. Ensure that working, battery-operated or battery
back-up carbon monoxide alarms are used in
any dwelling/structure that is in close proximity
to the running pressure washer.
6. Note that this pressure washer is NOT designed
or approved for use in vehicles or marine
applications. Never run the pressure washer
inside RVs or other vehicles, on boats, or on
pick-up truck beds.
Positioning:
1. The pressure washer should be positioned on a
firm, level (less than 3 degree slope), heat-
resistant surface with good drainage and a
nearby water supply.
2. The pressure washer should be placed within
garden hose distance of a continuous water
supply. Ensure that the pressure washer sits
level and will not slide or shift during operation.
If applicable, block the pressure washer's
wheels to prevent movement.
3. Situate so there is adequate pulling room for
starting the engine using the recoil starter.
Attempting to pull at an odd angle could rip off
grip cord and/or cause muscular injuries to the
operator.
Airflow:
1. Situate so there is adequate clearance around
pressure washer to allow for airflow – at least 7
feet from any non-combustible wall or
obstruction.
2. Do not operate with a tarp, blanket, or cover
surrounding the machine.
3. Do not place any objects against or on top of
the unit.
4. The pressure washer needs adequate,
unobstructed flow of air to allow for proper
combustion and adequate cooling. Proper
combustion can only be obtained when there is
a sufficient supply of oxygen available for the
amount of fuel being burned. Cooling
ventilation is required to prevent overheating of
the pressure washer and possible fire.
Exhaust:
WARNING: Exhaust Modification hazard
Never attempt to attach ductwork to the muffler system
to allow for installation inside an enclosure. This could
cause heat build-up and increased exhaust back-
pressure, resulting in possible exhaust leakage or
damage to the pressure washer.
1. The exhaust gas from your pressure washer is
extremely hot and can cause combustible
materials to catch on fire.
2. Make sure the engine is at least 7 feet from all
combustible materials and structures during
operation.
157136
157134