Manual

Storing the Pressure Washer
30 | P a g e
Any Questions, Comments, Problems, or Parts Orders
Call NorthStar ProSHOT Product Support 1-800-969-7073
• Add fuel stabilizer to the fuel (following manufacturer's instructions)
Fuel stabilizer steps:
1. Ensure engine fuel tank is full.
2. Add fuel stabilizer to fuel tank.
3. Run pressure washer with high pressure hose at least 5 minutes after adding stabilizer to allow it to
enter the fuel system.
4. Shut off engine.
Prepare Pressure
Washer for Storage
Prepare the pressure washer for storage.
1) Disconnect the battery, remove it from the battery compartment, and store it indoors above 32°.
2) Make sure the engine start switch is OFF and fuel valve is OFF.
3) Disconnect the engine spark plug wire if you have not already done so.
Move Pressure
Washer to Storage
Location
Let engine cool for 5 minutes before moving the pressure washer to its storage location.