Product Manual

Operation Preparing the Sprayer for Each Use
20
4. Inspect & repair
Inspect and test the sprayer thoroughly
a. Inspect hoses for exposed mesh and holes. Replace all worn or
damaged hoses.
b. Inspect fittings for cracks and leaks. Replace all damaged fittings with
original NorthStar parts.
c. Inspect tank for cracks.
d. Check to be sure all nuts, bolts, and screws are tight.
e. Ensure tank straps are snug.
f. Check oil levels in pump and gearbox. See pump owner’s manual.
g. Check oil level in engine. See engine owner’s manual.
h. Check for fuel leaks. Any fuel leak is a fire hazard. Fix any fuel leaks
before starting engine.
i. Partially fill tank with plain water and spray to test for leaks. Repair as
needed.
IMPORTANT: After any repair work has been done, ALWAYS test for
leaks with water one final time before using.