Product Manual

Assembly

Step Five: Run the light wiring through the frame and connect ground wire.

1. Pull wires through frame as shown below. Wires will pass through the holes in the frame

and sit on the inside of the side channels. Only the frame and A-frame tow bar are shown

for clarity.

2. Use (1) 1/4 x 3/4” bolt and (1) 1/4” nut to connect the white ground wire. Wrap bare wire

from the ground wire around the shaft of the bolt and secure to the frame in the hole

below the coupler. Ensure the flange nut breaks the paint to get a proper ground.

Brown

wire

Yellow

wire

Brown

wire

Green

wire

White wire

1/4” nut

1/4 x 3/4” bolt