Product Manual

Operation - Using the Sprayer (continued)
23
Strainer cap
Ball valve
CHEMICAL
7. Check
strainer cap
Ensure strainer cap is securely fastened.
8. Fill tank
Add pesticide to tank through fill cap:
a) Confirm the chemical/water dilution ratios specified on the chemical label.
b) Determine chemical and water volumes needed for the planned application,
taking into consideration that maximum tank capacity is 55 gallons.
Note: Only purchase and mix as much
chemical as you need for the planned
application in order to minimize
chemical over application and the need
for storing unused chemicals.
c) Add chemical to the tank through the
fill cap.
If the chemical is not pre-mixed, add
water and pesticide concentrate in
the order prescribed on the label.
9. Ensure
chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
10. Replace fill
cap
Replace fill cap and tighten securely.