Product Manual

Operation - Using the Sprayer (continued)
27
7. Adjust pressure as
needed
Turn the pressure regulator until the desired pressure is achieved. Do not
exceed 150 PSI.
8. Operate spray
gun (as needed
for application)
To spray, rotate the handle of the spray gun.
-Rotating the handle will change the spray pattern from OFF, to cone, to
stream.
Note: It is not unusual for the operator to be exposed to chemical while
operating the spray gun– gloves should be chemical resistant.
IMPORTANT: ALWAYS hold the spray gun with a firm grip when spraying
at higher pressures in order to prevent gun from whipping. Keep good footing
and balance at all times.
Pressure
regulator
Pressure gauge
