Product Manual

6
Component Identification
1. Oil Cap: A cover for the hole where the oil is poured in.
2. Breather Cap: Allows air to enter/exit the crankcase.
3. Air Filter: Removes particles from the air before they
reach the pump. Keep clean and particle free. See
“Pump Explosion and Pump Parts List” for replacement
part number.
4. Sight Glass: A window through which the level of oil can
be checked visually.
5. Magnetic Oil Drain Plug: Removal allows for drainage
of oil from pump. Attracts metal particles that could
damage pump.
6. Intercooler: Cools the compressed air as it travels
between stages. The flywheel/fan creates an air flow that
rushes past and cools the intercooler.
7. Aftercooler: Cools the compressed air from the pump
before it enters the receiver tank. The heat from the
compressed air is transferred outward to the cast iron
fins of the Aftercooler, the flywheel/fan creates an air
flow that rushes past and cools the cast iron fins.
Oil Cap
Sight
Glass
Magnetic Drain
Plug
Breather Cap
Air Filter
Oil Cap
Sight
Glass
Magnetic Drain
Plug
Breather Cap
Air Filter
Oil Cap
Sight
Glass
Magnetic Drain
Plug
Breather
Cap
Air Filter
Intercooler
Intercooler
Aftercooler
Aftercooler
Intercooler
4592900
4593000
4593100