Product Manual

Page 17 of 36
Reset Switch
NOTE: Some models are equipped with a dual voltage motor 115/230-volt. Most models are factory wired
for 115-volt operation. If conversion from 115-volt to 230-volt is required, refer to the motor nameplate
and have the conversion completed by a licensed electrician.
Figure E
How to Use Your Unit
WARNING
Do not operate this unit until you read this instruction manual for safety, operation, and maintenance
instructions.
Figure F
How to Stop
Set the Auto/Off switch to OFF.
Break-In Procedure
Risk of property damage. Serious damage may result if the following break-in instructions are not
closely followed.