Aluminum Telescoping Soft Wash Extension Wand: 6-24 Feet Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a NorthStar™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This telescoping wand is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The NorthStar Aluminum Telescoping Soft Wash Extension Wand is a heavy-duty, screw extension clamping system that positions the extension pole at the desired length for cleaning. The high-flow spray gun allows for low pressure chemical applications and is firmly secured to the exterior fiberglass pole. The gun inlet has a 5/8" hose barb. The nozzle holder accepts standard quick couple spray nozzles (nozzles not included).
⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. • Do not use the wand where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
before using. • Disconnect the power/air supply from the product and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. • Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use.
Before Each Use ⚠WARNING • Do NOT bypass, disable, or remove the trigger gun. • DO NOT use pliers, pipe wrenches, etc., to tighten as it will cause the collet to seize to the threaded plastic housing. HAND-TIGHTEN ONLY! Read, understand, and follow ALL safety guidelines and operation instructions prior to use. To Use the Wand Connect the outlet of your pressure washer to the inlet port of the trigger gun of the wand using appropriate quick couplers or fittings rated to handle high pressure.
⚠CAUTION Do not extend or retract your extension wand while spraying or while under pressure. Stop the equipment and relieve any pressure before making adjustments to the extension wand or changing nozzles. To Extend the Wand Loosen the lock rings and pull the wand out to the desired length. Re-tighten the lock rings to hold the wand at the desired length. To Retract the Wand Loosen the lock rings and slide the extension segment into the wand until the desired length is reached.
Maintenance ⚠WARNING Relieve pressure before performing any maintenance on gun or wand. Maintain the wand by adopting a program of conscientious repair and maintenance. It is recommended that the general condition of any tool be examined before it is used. Keep handles dry, clean, and free from oil and grease. Troubleshooting ⚠WARNING Work in a clean, uncluttered area. The following chart is based on a normal operation schedule.
Parts Diagram Wand Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Part Number 2103393 2103394 2510298 2701066 2103395 2510297 2510189 2203506 2200070 2103396 D20015 2103068 2550108 2550217 2550107 2103070 2660182 2660184 2660185 2680181 2702015 GPC0058 2103069 2550106 2660183 Part Description Pole Assembly, 24' Gun, 24' TW, 150 PSI M22 Plug, 1/4NPT-Male O-ring 1/2" PVC Hose Assembly, 26' Brass Hose Barb, 5/8"x3/8NPT-Male Adapter Washer, Lock SHCS, M4 x 16 Kit, TW,
Gun Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Part Number 2510005 2720040 2640046 2660414 2520196 2510004 2701048 2660007 2452001 2701050 2701049 2520001 2510003 2660415 2660004 2660005 2200002 2200001 2203407 2660013 2512002 Part Description Plug, Gun Spring, S316 Ball, 5/16”, Ceramic Seat, Gun, Peek Pin, Gun, S316 Washer, Brass O-ring Washer, Teflon Forging, Gun O-ring O-ring Tube, Inlet, Gun Fitting, Inlet, Gun Housing, Gun, left, 24’ Trigger, Gun Stop, Trigger, Gun Scr
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the NorthStar product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of two years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
