Product Manual

Page 6 of 13
before using.
• Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
• Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
• Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
• Keep guards in place and in working order. Never operate the product without the guards in place.
• Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
• To prevent serious injury or property damage, read and understand owner’s manual before
operating.
• Never use near power lines.
• Never extend or retract the wand while spraying or while under pressure. Stop the equipment and
relieve pressure before making any adjustments to the wand.
• Never change nozzles or accessories while under pressure. Stop the equipment and relieve
pressure before making any changes.
• Never use while on ladders or scaffolding.
• Never use with unapproved accessories.
• Never exceed rated pressure or volume.
• Never use high-pressure to clean persons or animals.
• Never remove or alter warning labels or identification tags.
• Never use wand if damaged.
• Always make certain area is clear of obstructions or hazards.
• Always maintain proper balance and control of extension wand.