Product Manual

Page 7 of 13
Before Each Use
⚠WARNING
• Do NOT bypass, disable, or remove the trigger gun.
• DO NOT use pliers, pipe wrenches, etc., to tighten as it will cause the collet to seize to the
threaded plastic housing. HAND-TIGHTEN ONLY!
Read, understand, and follow ALL safety guidelines and operation instructions prior to use.
To Use the Wand
Connect the outlet of your pressure washer to the inlet port of the trigger gun of the wand using
appropriate quick couplers or fittings rated to handle high pressure.
The wand may be used fully retracted or fully extended, or any point in between. Caution must be
used when the wand is extended as the reaction force of the nozzle spraying will cause the wand to
flex. Make absolutely certain that there are no power lines or sources of electrical power within 10 feet
of the lance at any time.
⚠WARNING
Contact with power transmission lines can cause fatal electrocution!
Operating Instructions
⚠WARNING
• Never use near power lines.
• Never extend or retract the wand while spraying or while under pressure. Stop the equipment and
relieve pressure before making any adjustments to the wand.
• Never change nozzles or accessories while under pressure. Stop the equipment and relieve
pressure before making any changes.
• Never use while on ladders or scaffolding.
• Never use with unapproved accessories.
• Never exceed rated pressure or volume.
• Never use high-pressure to clean persons or animals.
• Never remove or alter warning labels or identification tags.
• Never use wand if damaged.
• Always make certain area is clear of obstructions or hazards.
• Always maintain proper balance and control of extension wand.