Product Manual

NORTHSTAR
PUMP ANTIFREEZE PRESSURE WASHER
1. Turn off pressure washer and
disconnect both inlet and outlet hoses.
2. Unthread and remove the cap/valve
from NorthStar Pump Protector Antifreeze
and remove seal.
3. Re-attach the Red Cap / Valve. Be sure
the white valve is secured inside the cap.
Remove the black over-cap.
4. Connect and secure the bottle to the
garden hose inlet on the pressure washer
pump.
5. Squeeze the bottle to prime and fill the
pump with protectant and lubricant.
6. Final Step for Maximum Protection
Gasoline Washers – with the ignition
off pull the start cord to draw added
protectant into the pump.
Electric Washers – briefly turn on
washer and draw additional protectant
into the washer pump.
Re-attach
Secure
Squeeze
Pull